 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
gert
Member 3
Joined: 02 Jan 2015
Posts: 645
|
 Posted: 01/12/2017 19:14 Post subject: GPS receiver to determine the coordinates S7-1200, S7-1500 a |
 |
|
How do you use a GPS receiver to determine the coordinates and synchronize the system time of the S7-1200, S7-1500 and ET 200SP CPU?
https://support.industry.siemens.com/cs/document/45057335/
The SIMATIC controllers S7-1200, S7-1500 and ET 200SP can process standard GPS frames of the RMC data type according to the NMEA-0183 standard. A GPS receiver captures the GPS frames via the RS232 interface of the communication modules CM1241 RS232, CM PtP RS232 and CM PtP.
The function blocks in the attached library provide the degrees of longitude and latitude of your current position. In addition, the current UTC time and date in the "DTL" data type format are output and the system time of the CPU is synchronized.
Download
Current version V12.0 for STEP 7 V14 (TIA Portal) for GPS reception with S7-1200, S7-1500 and ET 200SP CPU
https://support.industry.siemens.com/cs/attachments/45057335/45057335_S7-1x00_GPS-timeSync_DOKU_V12d0_en.pdf
https://support.industry.siemens.com/cs/attachments/45057335/45057335_S7-1x00_GPS_LIB_V12d0.ZIP
https://support.industry.siemens.com/cs/attachments/45057335/45057335_S7-1x00_GPS_PROJ_V12d0.zip
Older Version 11.3 for STEP 7 V11 SP2 (TIA Portal) for GPS reception with S7-1200 (Firmware V2.2)
https://support.industry.siemens.com/cs/attachments/45057335/gps_rcv_v11d3.zip
https://support.industry.siemens.com/cs/attachments/45057335/gps_rcv_proj_v11d3.zip
Further Information
https://support.industry.siemens.com/cs/attachments/59057093/s71500_cm_ptp_function_manual_en-US_en-US.pdf
https://support.industry.siemens.com/cs/document/75226762/ptp-instructions-for-use-of-et-200mp-et-200sp-in-the-distributed-peripherals-of-a-s7-300-400-with-step-7-v5-5
https://support.industry.siemens.com/cs/attachments/75226762/PtP_Comm_V1_2.zip
https://support.industry.siemens.com/cs/attachments/75226762/Modbus_RTU_V1_2.zip
https://support.industry.siemens.com/cs/attachments/75226762/USS_Comm_V1_2.zip
| Code: | PtP communication instructions from PtP Communication:
FB610 (Port_Config) V1.0
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.2
FB614 (Receive_P2P) V1.5
FB615 (Signal_Get) V1.0
FB616 (Signal_Set) V1.0
FB617 (Receive_Reset) V1.0
FB618 (Get_Features) V2.0
FB619 (Set_Features) V2.0
FB620 (P3964_Config) V1.1
PtP communication instructions from MODBUS ( RTU ):
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.2
FB614 (Receive_P2P) V1.5
FB617 (Receive_Reset) V1.0
FB640 (Modbus_Comm_Load) V3.0
FB641 (Modbus_Master) V1.3
FB642 (Modbus_Slave) V1.2
PtP communication instructions from USS Communication:
FB610 (Port_Config) V1.0
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.2
FB614 (Receive_P2P) V1.5
FB630 (USS_Port_Scan) V2.1
FB631 (USS_Drive_Control) V1.0
FC632 (USS_Read_Param) V1.0
FC633 (USS_Write_Param) V1.0
|
|
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
