| View previous topic :: View next topic |
| Author |
Message |
asweahley
Junior
Joined: 01 Nov 2011
Posts: 3
|
 Posted: 29/05/2022 06:55 Post subject: uploading from GE 90-30 cpu 350 problem |
 |
|
| i am using PME 8.0 to upload a program fro 90-30 cpu350 , when going on line it is just trying but no connection , the cable i use is IC690USB901 from PLCCABLE.COM. i try to search around for an other 90-30 plc to check if it is the cable fault but there was none as most are using siemens plc any idea how to solve |
|
| Back to top |
|
 |
qaypett
Junior
Joined: 26 May 2022
Posts: 3
|
| Posted: 29/05/2022 10:17 Post subject: |
|
|
Series 90™-30 PLC Installation and Hardware Manual
[url=http://www.girlshare.ro/3770199778.4]gfk0356q.pdf[/url]
Check what cables can you use |
|
| Back to top |
|
|
asweahley
Junior
Joined: 01 Nov 2011
Posts: 3
|
| Posted: 05/06/2022 08:01 Post subject: |
|
|
| according to PLCCABLES.COM and others that is the cable for 90-30 plc but i can not connect to cpu350 with PME 8 , i try it on versamax nano plc and it worked fine , the same cpu port is used to connect to an HMI and working perfect . some is telling that for cpu350 a PME 9.1 or higher must be used . |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
