| View previous topic :: View next topic |
| Author |
Message |
nayantha88
Junior
Joined: 17 May 2019
Posts: 5
|
 Posted: 08/07/2020 14:21 Post subject: TIA portal V16 Vs V11 |
 |
|
I have 2 questions.
1.
I have a s7 1200 PLC programmed using Tia Portal V11. but I dont have the project. only PLC is available
Can I use TIA portal V16 to upload/download/modify the Program available in CPU.
2.
I have a S7 1200 PLC firmware version 4.1
Can I use Tia Portal V11 to program this PLC as when I'm trying to add the PLC in TIA V11 it only shows PLC V2.1
Thanks,
Nayantha |
|
| Back to top |
|
 |
oleksa
Member
Joined: 27 Dec 2013
Posts: 123
|
| Posted: 08/07/2020 20:20 Post subject: |
|
|
1. Read this
What options are available in STEP 7 (TIA Portal) for uploading when the project version in the CPU no longer matches the version on your PG / PC?
https://support.industry.siemens.com/cs/document/97554052/what-options-are-available-in-step-7- (tia-portal)-for-uploading-when-the-project-version-in-the-cpu-no-longer-matches-the-version-on-your-pg-pc
Manual
https://support.industry.siemens.com/cs/attachments/109773506/STEP_7_WinCC_V16_enUS_en-US.pdf
If you do not have the project not. If you have the project then migrate V11..v12......V16 and upload to PLC
You can find V11 in this forum
2 Use compatibility
https://support.industry.siemens.com/kompatool/pages/main/start_maincomponent_selection.jsf
Choose V4.1 S71200 CPU 1214C
Choose Step7 Prof only from V13 upward
As you can see you can use any version from V13 to V16. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
