plc.myforum.ro

Ramomkosta · Junior 2 Joined: 21 Feb 2013 Posts: 43 Location: Brazil

This is a First and unique(I' guess) Profinet STS Crane project.
Also RTGs Project.

Image:
STS and RTG CRANE PROFINET Cranes in BRAZIL STS and RTG CRANE PROFINET Cranes in BRAZIL

STS and RTG CRANE PROFINET Cranes in BRAZIL STS and RTG CRANE PROFINET Cranes in BRAZIL

ZPMC(Shanghai Zhenhua Port Machinery)
Project of STS_Crane(SHIP-TO-SHORE) or (Portainer) PROFINET TECHNOLOGY.

Use Siemens Automation, CPU S7-416-3 and SIMOTION D435-2.
With SIMOCRANE and Sway-control technology Software.

STS Project
S7-Simatic(v5.5 SP4) WinccFlex2008SP3 and Simotion Scout (v4.4) Project:

[url]https://www.datafilehost.com/d/53325f42[/url]

RTG Project
S7-Simatic(v5.5 SP4), WinccFlex2008SP3 and Starter(v4.4) Project:

https://www.datafilehost.com/d/0df5fd51

:whistle:

shadow1990 · Junior Joined: 26 Feb 2014 Posts: 5

Thanks @Ramomkosta

AnteSavilt · Member 2 Joined: 13 Feb 2018 Posts: 264 Location: Croatia

SIMOCRANE CeSAR standalone STS, GSU V3.0 update
https://support.industry.siemens.com/cs/document/109220170/simocrane-cesar-standalone-sts-gsu-v3-0-update
Download of SIMOCRANE CeSAR standalone STS, GSU V3.0
Enclosed you will find the following example projects (S7-examples for interface, STS and GSU), Setup CeCOMM and MMC-card Image.
Prerequisite for applying the example projects are:
Hardware
SIMOTION C240 PN: Firmware V5.2 SP1 (V5.02.01.00)
SIMOCRANE: CenSOR V2.0 HF4 (optional)
Software
SIMOCRANE CeCOMM diagnostic program version V4.4.2.4
SIMOCRANE CeSAR standalone STS, GSU V3.0
SIMATIC Manager V5.6 or higher (optional)
TIA Portal V15.1 (optional)
Microsoft Windows 7 or 10

No. Description Name of software
1 Setup CeComm
2 MMC-card image via Profinet
3 MMC-card image via Profibus
4 Example project for SC-sequential-control_GSU via Profinet
5 Example project for SC-sequential-control_STS via Profinet in classic
6 Example project for SC-sequential-control_STS via Profinet in TIA-Portal
7 Application description

Download
https://ulozto.net/tamhle/2hbwLakhUyxK

https://bayfiles.com/vfS4B5Aco6/ReadMe_OSS_zip
https://bayfiles.com/z4SdBbAcoe/Readme_SIMOCRANE_CeSAR_standalone_STS_GSU_V3_0_pdf
https://bayfiles.com/30S7BeAdoe/SwayControl_SimoC_TIA_STS_PN_zip
https://bayfiles.com/57S5B4A2o8/ApplicationDescription_CeSAR_STS_V3.0_pdf
https://bayfiles.com/7fScBeAbo0/SwayControl_SimoC_STS_PN_zip
https://bayfiles.com/98S9BbA6o4/SwayControl_SimoC_GSU_PN_zip
https://bayfiles.com/J1S7BaA3o3/SIMOCRANE_CeSAR_standalone_STS_GSU_op_man_1119_en-US_pdf
https://bayfiles.com/P8S4BfAeo6/Setup_CeCOMM_V4.4.2.4_zip
https://bayfiles.com/d7T1BeAco3/SIMOTION_Card_DP_zip
https://bayfiles.com/f6T4B1A8o0/SIMOTION_Card_PN_zip

AnteSavilt · Member 2 Joined: 13 Feb 2018 Posts: 264 Location: Croatia

SIMOCRANE, Sway Control: Upgrade Simocrane CeSAR standalone STS, GSU
https://support.industry.siemens.com/cs/document/108894674/simocrane-sway-control%3A-upgrade-simocrane-cesar-standalone-sts-gsu
Instructions Upgrade Simocrane CeSAR standalone STS, GSU:

Note the IP address and the PROFIBUS address that were configured on SIMOTION C.
Switch off SIMOTION C and remove MMC card.
Copy content of MMC-card to some backup folder with card reader.
Delete all folders and files on MMC-card except folder keys and its content.
Copy the content of SIMOTION_Card.zip (located on product DVD) to the MMC-card. As of version V2.1 SP2 HF1 there are two different files available ("SIMTION_Card_DP.zip" and "SIMOTION_Card_PN.zip"). Select the corresponding one to the used communication interface.
Copy the parameter files (par0.txt, par1.txt, par2.txt, par3.txt) from the backup folder to the MMC-card under the folder 'swaycontrol'. This will overwrite the files that are already on the card.
On MMC-card remove write-protection from folder swaycontrol and its content, if it exists.
Put MMC-card back into SIMOTION C, switch on SIMOTION C and wait until it switches to mode RUN.
Connect with CeCOMM to SIMOTION C. SIMOTION C now has default IP address 192.168.1.158.
Go to parameter menu and save parameters.
Optional
Change IP-address and / or PROFIBUS-address to the values noted in step 1.
Change parameter P77 to value 200 (refer to restriction in Readme).

AnteSavilt · Member 2 Joined: 13 Feb 2018 Posts: 264 Location: Croatia

SIMOCRANE CeSAR standalone OHBC, Gantry crane version 4.2 SP1
https://support.industry.siemens.com/cs/document/109739069/simocrane-cesar-standalone-ohbc-gantry-crane-version-4-2-sp1
Prerequisite for applying the example projects are:
hardware
SIMOTION C240 PN: Firmware V4.3.1.1
SIMOCRANE: CenSOR V2.0 (optional)
software
Diagnostic program SIMOCRANE CeCOMM as of Version V4.4.1.23
Valid license authority for SIMOCRANE Sway Control
Download
https://ulozto.net/tamhle/A289BhkzGNtK
m
https://bayfiles.com/ne12C9A3o7/TIA_integration_of_SC_OHBC_standalone_application_program_201803_pdf
https://bayfiles.com/pa1fC8Aeo6/Readme_SIMOCRANE_CeSAR_standalo_pdf
https://bayfiles.com/r11dC7Aaoa/SC_OHBC_standalone_application_program_1_zip
https://bayfiles.com/tb1bC9A7oc/S7_sampl_zip
https://bayfiles.com/x81cCcA6o9/SIMOCRANE_Operating_Instructions_Drive-Based_Sway_Control_en_en-US_pdf
https://bayfiles.com/zc1cC0A1o5/Setup_CeCOMM_zip
https://bayfiles.com/3118CcAfoa/SIMOTION_card_zip