plc.myforum.ro

mayo · Administrator Joined: 14 Jun 2009 Posts: 700

Dear users,
with this post I try to help to make money with your intelligence from your home.....

here is a site, you must be registered and you can earn money if you solve problems from this site....
https://www.elance.com/j/spherical-atonomous-vehicle-micro-controller-expert/28455881/
The project will be in similar nature to this following video:

[obscured]/watch?v=pF0uLnMoQZA

I am looking for a Electrical Engineering, C,C++ Programmer, Micro-Controller expert.

Please review the following information:

FACE RECOGNITION
[obscured]/id/Face-detection-and-tracking-with-Arduino-and-OpenC/

VOICE RECOGNITION
[obscured]/id/Voice-Control-Robot-in-7-Minutes/

TRANSMITTER/RECEIVER
[obscured]/2011/11/09/satarii-star-movement-tracking-camera-dock-concept-finalized-as/

The above instructional information are for reference and should be used in the interface creation for the SAV. I would like to incorporate all of them is a spherical vehicle that is around 4"-5" in diameter.

Also the scope will conține the following:

1. USB support on board
2. GPS support on board
3. Bluetooth Technology on board
4. Micro Camera
5. LED'S
6. Micro Controllers

The above items will be included within a footprint of 4-5 inches. All will need to be of extra light weight materials and be able to be powered by light weight lithium batteries for both electronics and also for powering proposed vehicle.

OBJECTIVE
Project to use "Off the shelf" materials with little or no modifications in order to keep prices down and tried and tested materials only make it in this project.

This project will require an Engineer to work also with the Aeronautical Engineer on the project to examine and coordination of the electronics with the proposed vehicle.

Client: dalennea (United States) https://www.elance.com/e/dalennea/

enjoy....