 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
AnteSavilt
Member 2
Joined: 13 Feb 2018
Posts: 264
Location: Croatia
|
 Posted: 01/02/2021 20:04 Post subject: SINEC NMS V1.0 |
 |
|
SINEC NMS V1.0
https://support.industry.siemens.com/cs/document/109762387/
The SINEC NMS software is a network management system for monitoring and managing industrial networks. It enables you to fully visualize and monitor networks. Using SNMP and simultaneous diagnostics with SIMATIC and PROFINET mechanisms, you can map many aspects of plant and network diagnostics in just one tool. Using the distributed approach of SINEC NMS, the network infrastructures can be expanded at any time. The acquired data is stored in a long-term archive and can be evaluated and displayed as necessary. The predefined network diagnostics can also be seamlessly integrated into HMI / SCADA systems (e.g. WinCC, PCS 7) via OPC UA and web mechanisms.
Main features:
| Code: | Inventory list
SINEC NMS detects all devices on the network. This means an up-to-date overview of all installed components including all their essential features is produced in the network.
Topology
The plant topology is automatically read out, depicted and monitored for changes.
The type of medium, redundancy and VLANs are displayed graphically.
Wireless connections between access points and client modules (SCALANCE W) are displayed.
Monitoring
Diagnostics data is collected from all network nodes and centrally archived.
Besides SNMP (Simple Network Management Protocol), it is also possible to directly access SIMATIC controllers (S7-300 / S7-400) or PROFINET nodes via "Read data record".
SIMATIC S7-1200 and S7-1500 are detected and completely read out via SNMP.
Diagnostics of NAT routers (Network Address Translation).
Detection and display of devices with IPv6 addresses.
Diagnostics
Overall network status is displayed in a central dashboard.
Diagnostic states are signaled as events and the corresponding devices highlighted in color in the user interface. This enables faults to be detected early.
Easy localization of faults thanks to a structured user interface (views) and display of the diagnostics in the topology.
Reporting
Statistics can be displayed and evaluated over any time period. This makes for easy evaluation of historical events.
Validation
Major properties of the network can be tested and documented repeatedly by means of configurable test patterns.
The validation result is stored together with all the underlying data as a PDF.
Further processing
A variety of interfaces (eg HTTPS, OPC UA) enable network and diagnostic data to be displayed and processed further in higher-level systems.
Emails can be triggered based on specific events.
Configuration management :
Rule-based configuration (policy-based) of a wide range of network functions, such as LAN / WLAN parameters.
Bulk operation for device configuration for individual or numeroase SCALANCE components.
Backup / restoring and comparison of the device configurations of SCALANCE components.
Firmware management :
Bulk operation for firmware update for individual or multiple SCALANCE components.
Firmware update function that takes topology into account.
User management :
Central management of roles and rights in the overall system.
Use of users from RADIUS or active directory via UMC (User Management Components). |
In addition, SINEC NMS enables you to configure the network infrastructure. Using the rule-based approach, you can configure across devices in the network independent of device types or you can regularly back up the device configuration to keep up with configuration changes. Another major point is the central function for a firmware update in the network infrastructure.
Download
https://fastshare.cz/15713408/sinec-nms-v1.0.exe
https://fastshare.cz/15713537/open-source-software.zip
https://ulozto.net/file/CGnK1Od8nS0U/sinec-nms-v1-0-exe
https://anonfiles.com/xdY8FdEbp6/SINEC_NMS_V1.0_exe
https://bayfiles.com/T1Y2F9Eapc/SINEC_NMS_V1.0_exe |
|
| Back to top |
|
 |
AnteSavilt
Member 2
Joined: 13 Feb 2018
Posts: 264
Location: Croatia
|
| Posted: 01/02/2021 20:50 Post subject: SINEC NMS V1.0 SP1 |
|
|
SINEC NMS V1.0 SP1
https://support.industry.siemens.com/cs/document/109776939/
SINEC NMS V1.0 SP1 contains the following essential new functions in addition to numerous smaller enhancements:
New supported device families:
| Code: | The RUGGEDCOM ROS and RUGGEDCOM ROX2 device families are now fully supported by SINEC NMS.
Firewall management
Central firewall and NAT management based on graphically described communication relationships (for SCALANCE S615, SCALANCE SC600 and RUGGEDCOM ROX2 firewalls)
Rule-based device configuration
Executing CLI commands via SSH
Configuration of VLANs
Configuration of RSTP
Configuration of loop detection
Comprehensive configuration of SCALANCE WLAN access points and clients:
Monitoring
Calling of interfaces via special URLs
SNMP informs can be received.
Improved monitoring when using NAT
Audit log
Important user activities (firewall management, device configuration, logon / logoff, etc.) are recorded and stored by the system.
Syslog
All events and audit logs known in the system can be sent to a central syslog server.
Certificate management
Establishing trusted relationships with devices using SSH / HTTPs certificates
SINEC NMS-based HTTPS certificates can be transferred (rule-based) to network devices.
Operation management
Up to 75 operations (for 500 devices each) can be connected to one control.
IP of control and operation can be changed.
Discovery restrictions can be set.
Device profiles can be exported and imported.
The integrity of the system can be validated.
System logs of the entire system can be automatically transferred to the control. |
Download
https://fastshare.cz/15713524/sinecnms-v1.0-sp1.exe
https://fastshare.cz/15713537/open-source-software.zip
https://ulozto.net/file/iVplM49mswhH/sinecnms-v1-0-sp1-exe
https://anonfiles.com/V0T4G0Edpc/SINECNMS_V1.0_SP1_exe
https://bayfiles.com/Z1TeG9E7p3/SINECNMS_V1.0_SP1_exe |
|
| Back to top |
|
|
AnteSavilt
Member 2
Joined: 13 Feb 2018
Posts: 264
Location: Croatia
|
| Posted: 01/02/2021 20:51 Post subject: Update 1 for SINEC NMS V1.0 SP1 |
|
|
Update 1 for SINEC NMS V1.0 SP1
https://support.industry.siemens.com/cs/document/109792922/
Update 1 contains the following improvements:
This version contains security-relevant changes.
Elimination of problems with sockets and SSH connections
Elimination of problems with the interface list
Support of devices from SINEC NMS V1.0 SP1 HSP V3.0
Download
https://ulozto.net/tamhle/zpO2ibPFzhhH/
https://fastshare.cz/15713205/sinecnms-v1.0-sp1-upd1.exe
https://fastshare.cz/15713208/oss-sinec-nms-99.pdf
https://anonfiles.com/HeI7EbEfp4/OSS_SINEC-NMS_99_pdf
https://anonfiles.com/1eMcE4E2pc/SINECNMS_V1.0_SP1_UPD1_exe
https://bayfiles.com/R9I6E0Eep5/OSS_SINEC-NMS_99_pdf
https://bayfiles.com/B5NeE2Ecpb/SINECNMS_V1.0_SP1_UPD1_exe |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
