| View previous topic :: View next topic |
| Author |
Message |
Sorrow91
Junior
Joined: 28 Aug 2015
Posts: 1
|
 Posted: 28/08/2015 08:19 Post subject: SINAUT SIEMENS ST7 |
 |
|
Hey guys,
did anyone got a download link for SINAUT SIEMENS ST7 that works?
All the links in the forum are offline :(
Best regards |
|
| Back to top |
|
 |
maersk
Member 3
Joined: 17 Aug 2014
Posts: 891
|
| Posted: 28/08/2015 13:34 Post subject: Re: SINAUT SIEMENS ST7 |
|
|
| Sorrow91 wrote: | Hey guys,
did anyone got a download link for SINAUT SIEMENS ST7 that works?
All the links in the forum are offline :(
Best regards |
check this
http://plc.myforum.ro/viewtopic.php?p=18712#18712 |
|
| Back to top |
|
|
atomik
Member junior
Joined: 07 Jun 2017
Posts: 79
|
| Posted: 21/03/2018 18:44 Post subject: SINAUT Engineering Software V5.5 + SP2 |
|
|
SINAUT Engineering Software V5.5 + SP2
https://support.industry.siemens.com/cs/document/109744849/
The following new functions are supported with V5.5 + SP2:
| Code: | SINAUT ST7: Use of the TD7onTIM Library in stand-alone mode of the TIM 4R-IE for connection to SIMATIC S7-400 and SIMATIC S7-400H.
DNP3: Engineering support of the operation of two TIM 4R-IE DNP3s on a SIMATIC S7-400H system when connected to a PCS7 control center with Telecontrol.
Optimization of the connection configuration when opening large projects with a large number of stations and medium-sized projects with complex networking.
System requirements:
Windows 7 Professional, Ultimate (32-bit/64-bit)
Windows Server 2008 R2 SP1 Standard (64-bit)
Windows XP SP3
Windows Server 2003 R2 SP2
STEP7 V5.5 … STEP 7 V5.5 SP4 |
Download:
https://support.industry.siemens.com/cs/attachments/109744849/OSS_SINAUT-ES_86.pdf
https://support.industry.siemens.com/cs/attachments/109744849/Update_V5p5_to_V5p5p2_OSS.zip
SINAUT ST7 Engineering V5.5 with SP2.rar full 40.4 MB
| Code: | | https://mega.nz/#!80J0BJBL!sIotRDno1QhFzUPAaAYwoHARV7NnDnOGoo3eKbXoIM4 |
|
|
| Back to top |
|
|
atomik
Member junior
Joined: 07 Jun 2017
Posts: 79
|
| Posted: 21/03/2018 18:48 Post subject: SINAUT engineering software V5.5 + SP3 |
|
|
SINAUT engineering software V5.5 + SP3
https://support.industry.siemens.com/cs/document/109755375/
The following new functions are supported with SINAUT engineering software V5.5 + SP3:
| Code: | SINAUT ST7: Support for a proxy functionality for configuring the connection of TIM 1531 IRC in SINAUT engineering software V5.5 + SP3 with an export function for further configuration in TIA Portal V15.
Adaptation of the SINAUT engineering software to the operating systems supported by STEP 7 V5.6.
System requirements:
MS Windows 7 Ultimate, Professional and Enterprise (64-bit), with SP1
MS Windows 10 Pro and Enterprise (64-bit)
MS Windows Server 2008 R2 (64-bit), with SP1 (standard edition as workstation computer)
MS Windows Server 2012 R2 (64-bit) (standard edition as workstation computer)
MS Windows Server 2016 (64-bit) (standard edition as workstation computer)
There is no guarantee that STEP 7 will run on other operating systems. The user does so at their own risk. |
Download:
https://support.industry.siemens.com/cs/attachments/109755375/OSS_SINAUT-ES_86.pdf
https://support.industry.siemens.com/cs/attachments/109755375/Update_V5.5_to_V5.5.3_OSS.zip
SINAUT ST7 Engineering V5.5 with SP3.rar full 40.2 MB
| Code: | | https://mega.nz/#!MooExKQB!_4kQBELBxL2kMS0vjLY0qSN-zC5ZBocZOEM7vTvax3w |
|
|
| Back to top |
|
|
atomik
Member junior
Joined: 07 Jun 2017
Posts: 79
|
| Posted: 21/03/2018 18:53 Post subject: TIM 1531 IRC V1.1 and TD7onCPU V3.0 |
|
|
TIM 1531 IRC V1.1 and TD7onCPU V3.0
https://support.industry.siemens.com/cs/document/109755374/
The product TIM 1531 IRC can only be configured as a component of the SIMATIC S7-1500 system with STEP 7 Professional (TIA Portal) as of V14 SP1.
To use the new functions, the product TIM 1531 IRC must be configured with TIA Portal V15 Update 1.
Firmware V1.1 contains new functions and product improvements concerning general operation of the module in the S7-1500 system. Upgrading via a free firmware update therefore generally makes sense and is recommended.
| Code: |
New functions
PG routing for TIM 1531 IRC.
TD7onCPU V3.0 for S7-1500 with TIM 1531 IRC. Refer to the information in the manual.
Proxy function in SINAUT engineering software for connection configuration in STEP 7 V5.6 with import of connection information into STEP 7 Professional V15 (TIA Portal). Also read the information in the release of SINAUT Engineering Software V5.5 + SP3 (109755375) as well as the system manual
Industrial Remote Communication – TeleControl SINAUT ST7 – Software Volume 2 (configuration under STEP 7 V5). |
Download:
https://support.industry.siemens.com/cs/attachments/109755374/OSS_TIM1531IRC_99.pdf
https://support.industry.siemens.com/cs/attachments/109755374/OSS_TIM1531IRC-TI_76.pdf
Firmware update V1.1 for TIM 1531 IRC
https://support.industry.siemens.com/cs/attachments/109755374/6GK7_543-1MX00-0XE0_V01.01.10_OSS.zip
Block library TD7onCPU for S7-1500 with TIM 1531 IRC.
https://support.industry.siemens.com/cs/attachments/109755374/Telecontrol_ST7_V3_0.exe
TIM 1531 IRC V1.1 and TD7onCPU V3.0.rar28.6 M
| Code: | | Bhttps://mega.nz/#!t9BVVBZS!d5pyK6IPGBZQE6Zs0XyTrBEsHragsrfidcLNZBGaoFc |
|
|
| Back to top |
|
|
eokz
Junior
Joined: 26 Mar 2018
Posts: 1
|
| Posted: 26/03/2018 18:44 Post subject: Re: TIM 1531 IRC V1.1 and TD7onCPU V3.0 |
|
|
| atomik wrote: | TIM 1531 IRC V1.1 and TD7onCPU V3.0
https://support.industry.siemens.com/cs/document/109755374/
The product TIM 1531 IRC can only be configured as a component of the SIMATIC S7-1500 system with STEP 7 Professional (TIA Portal) as of V14 SP1.
To use the new functions, the product TIM 1531 IRC must be configured with TIA Portal V15 Update 1.
Firmware V1.1 contains new functions and product improvements concerning general operation of the module in the S7-1500 system. Upgrading via a free firmware update therefore generally makes sense and is recommended.
| Code: |
New functions
PG routing for TIM 1531 IRC.
TD7onCPU V3.0 for S7-1500 with TIM 1531 IRC. Refer to the information in the manual.
Proxy function in SINAUT engineering software for connection configuration in STEP 7 V5.6 with import of connection information into STEP 7 Professional V15 (TIA Portal). Also read the information in the release of SINAUT Engineering Software V5.5 + SP3 (109755375) as well as the system manual
Industrial Remote Communication – TeleControl SINAUT ST7 – Software Volume 2 (configuration under STEP 7 V5). |
Download:
https://support.industry.siemens.com/cs/attachments/109755374/OSS_TIM1531IRC_99.pdf
https://support.industry.siemens.com/cs/attachments/109755374/OSS_TIM1531IRC-TI_76.pdf
Firmware update V1.1 for TIM 1531 IRC
https://support.industry.siemens.com/cs/attachments/109755374/6GK7_543-1MX00-0XE0_V01.01.10_OSS.zip
Block library TD7onCPU for S7-1500 with TIM 1531 IRC.
https://support.industry.siemens.com/cs/attachments/109755374/Telecontrol_ST7_V3_0.exe
TIM 1531 IRC V1.1 and TD7onCPU V3.0.rar28.6 M
| Code: | | Bhttps://mega.nz/#!t9BVVBZS!d5pyK6IPGBZQE6Zs0XyTrBEsHragsrfidcLNZBGaoFc |
|
Thank you atomik. |
|
| Back to top |
|
|
gfkat
Junior
Joined: 07 Jun 2013
Posts: 5
|
| Posted: 09/09/2020 14:40 Post subject: Re: SINAUT engineering software V5.5 + SP3 |
|
|
Please re-upload SINAUT ST7 Engineering V5.5 with SP3.rar
thank you.
| atomik wrote: | SINAUT engineering software V5.5 + SP3
https://support.industry.siemens.com/cs/document/109755375/
The following new functions are supported with SINAUT engineering software V5.5 + SP3:
| Code: | SINAUT ST7: Support for a proxy functionality for configuring the connection of TIM 1531 IRC in SINAUT engineering software V5.5 + SP3 with an export function for further configuration in TIA Portal V15.
Adaptation of the SINAUT engineering software to the operating systems supported by STEP 7 V5.6.
System requirements:
MS Windows 7 Ultimate, Professional and Enterprise (64-bit), with SP1
MS Windows 10 Pro and Enterprise (64-bit)
MS Windows Server 2008 R2 (64-bit), with SP1 (standard edition as workstation computer)
MS Windows Server 2012 R2 (64-bit) (standard edition as workstation computer)
MS Windows Server 2016 (64-bit) (standard edition as workstation computer)
There is no guarantee that STEP 7 will run on other operating systems. The user does so at their own risk. |
Download:
https://support.industry.siemens.com/cs/attachments/109755375/OSS_SINAUT-ES_86.pdf
https://support.industry.siemens.com/cs/attachments/109755375/Update_V5.5_to_V5.5.3_OSS.zip
SINAUT ST7 Engineering V5.5 with SP3.rar full 40.2 MB
| Code: | | https://mega.nz/#!MooExKQB!_4kQBELBxL2kMS0vjLY0qSN-zC5ZBocZOEM7vTvax3w |
|
|
|
| Back to top |
|
|
atomik
Member junior
Joined: 07 Jun 2017
Posts: 79
|
| Posted: 15/09/2020 11:28 Post subject: |
|
|
https://anonfiles.com/X0Zas8Vfo6/SINAUT_ST7_Engineering_V5.5_with_SP3_zip
[url=http://www.girlshare.ro/3769966361.7]SINAUT+ST7+Engineering+V5.5+with+SP3.zip[/url] |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
