plc.myforum.ro

grig100 · Member 3 Joined: 01 Jan 2015 Posts: 752

Backup and Restore of the SINAMICS S210 device settings with SIMATIC
https://support.industry.siemens.com/cs/document/109769958/
Two SIMATIC function blocks to control several drive functions of the SINAMICS S210
The function block SINA_BACKUP_RESTORE is used to save drive settings remanently in the controller’s memory. The drive settings therefore are stored in a global DB of the controller. By the function block the stored settings can be transferred to a drive device. For the transfer there are two modes available:
Transfer the parameter settings including communication data (e.g. for spare part replacement)
Transfer the parameter settings without communication data (e.g. for serial commissioning)
The function block SINA_SERVICE includes the control of the following drive functions of the SINAMICS S210:
Copy Ram to Rom (save parameter settings remanently at the drive device)
Acknowledge faults
Reset the drive device to factory settings

Preconditions
TIA Portal V16 or more recent
SINAMICS S210 (from Firmware V5.2)
SIMATIC S7-1500 or S7-1500T
SIMATIC S7-1500 or
SIMATIC ET200 CPU / ET200SP or
SIMATIC ET200 CPU / ET200pro / CPU 1516pro-2 or
SIMATIC Controller Application / SIAMTIC S7-1500 Software Controller (außer CPU 1505S) or
SIMATIC S7 Open Controller / ET200SP Open Controller or
integrierte SIMATIC S7-1500 bei SINUMERIK ONE / SINUMERIK MC
Downloads
https://support.industry.siemens.com/cs/attachments/109769958/109769958_SINA_backup_restore_SINA_service_en_V3_0.pdf
https://support.industry.siemens.com/cs/attachments/109769958/LSINASup_V300.zip

https://anonfiles.com/12A8A5xap9/LSINASup_V300_zip
https://anonfiles.com/D7A6Afx4p8/109769958_SINA_backup_restore_SINA_service_en_V3_0_pdf