plc.myforum.ro

grig100 · Member 3 Joined: 01 Jan 2015 Posts: 752

SINAMICS S120: Linear flying saw application with DCB extension
https://support.industry.siemens.com/cs/document/109477745/sinamics-s120%3A-linear-flying-saw-application-with-dcb-extension
Typically, a flying saw comprises a sledge equipped with a knife or saw, which cuts a material web, generally in identically large sections (formats).

The linear flying saw synchronizes position controlled from a starting position to the material, moves with synchronous velocity and moves back to the starting position after cutting. From the start position the next synchronization can be started. The saw is synchronized with the material using the position sensing function of an upstream feed drive or using a measuring wheel.

The flying saw application includes the following functions:
• Real leading axis /measuring wheel
• Virtual leading axis/test operation
• Measuring wheel correction
• Traversing to maintenance position
• Mode for unspecific compus lengths
• Software limit switches
• Hardware limit switches
• Different cutting types are available (e.g. continuous cutting, test cut, single cut)
• Jogging
• Flying homing for following axis and real leading axis
• Homing for following axis and real leading axis
• Print mark correction on the leading axis side
• Create gap
• Clamping function
• Material counter
• Positioning for the real leading axis as well as autonomously, for the following axis
• Dead time compensation
• Following error monitoring
• Speed/torque precontrol

SINAMICS S120: Linear flying saw application with DCB extens SINAMICS S120: Linear flying saw application with DCB extens

SINAMICS S120: Linear flying saw application with DCB extens SINAMICS S120: Linear flying saw application with DCB extens

Manuals
Flying Saw DCC 12/2015 (2,9 MB)
https://support.industry.siemens.com/cs/attachments/109477745/109477745_S120_FlyingSaw_DCC_V1_2_en.pdf
DCB Extension libraries 06/2015 (1,4 MB)
https://support.industry.siemens.com/cs/attachments/109477745/FH_DCB_Extension_libraries_V1_0_en.pdf
Software
Flying Saw V1.20 XML Export (391,5 KB)
https://support.industry.siemens.com/cs/attachments/109477745/109477745_S120_FlyingSaw_V1_2_XML_Export.zip
GMCV3.1 SINAMICS 4.7 (565,3 KB)
https://support.industry.siemens.com/cs/attachments/109477745/GMCV3_1_sinamics4_7.zip
Math Extended V1.0 SINAMICS 4.7 (173,1 KB)
https://support.industry.siemens.com/cs/attachments/109477745/math_extendedV1_0_sinamics4_7.zip
For control of this application the SIMATIC library LMCSINA is available
LMCSINA library V2.1 09/2015 (german) (2,1 MB)
https://support.industry.siemens.com/cs/attachments/109477745/LMCSINA_library_V2_1_de.pdf
Registrierung notwendig LMCSINA library V2.1 (2,0 MB)
https://support.industry.siemens.com/cs/attachments/109477745/LMCSINA_V2_1_HF2.zip

grig100 · Member 3 Joined: 01 Jan 2015 Posts: 752

https://support.industry.siemens.com/cs/document/109477745/sinamics-s120%3A-linear-flying-saw-application-with-dcb-extension
Software

https://support.industry.siemens.com/cs/attachments/109477745/109477745_S120_FlyingSaw_V2_0_XML_Export.zip
https://support.industry.siemens.com/cs/attachments/109477745/GMCV4_1_sinamics4_8.zip
https://support.industry.siemens.com/cs/attachments/109477745/math_extendedV1_0_sinamics4_7.zip

Commissioning Assistant
https://support.industry.siemens.com/cs/attachments/109477745/Projectassistant_FlyingSawenglishgerman_V1_0.zip

For control of this application the SIMATIC library LMCSINA is available
https://support.industry.siemens.com/cs/attachments/109477745/109479491_LMCSINA_V2_4_en.pdf
https://support.industry.siemens.com/cs/attachments/109477745/109479491_LMCSINA_library_V2.4.0.zip