plc.myforum.ro

gert · Member 3 Joined: 02 Jan 2015 Posts: 645

Integration of a SINAMICS S120 into SIMATIC PCS 7 via PROFINET
https://support.industry.siemens.com/cs/document/109750296/
The application example describes how to configure a SINAMICS S120 drive system in SIMATIC PCS 7 V9.0 via PROFINET.

The drive system is connected to the AS 410-5H automation system via single PROFINET configuration S1 and system redundancy S2.
Furthermore, the CMT engineering description of the S120 is based on a ready-made and tested template whereas the drive is operated and monitored via the OS runtime.
SINAMICS S120 :Integration into SIMATIC PCS 7 via PROFINET SINAMICS S120 :Integration into SIMATIC PCS 7 via PROFINET

SINAMICS S120 :Integration into SIMATIC PCS 7 via PROFINET SINAMICS S120 :Integration into SIMATIC PCS 7 via PROFINET

Integration of a SINAMICS S120 in PCS 7 via PROFINET
Integration of the solution Template
Engineering with the Solution Template
Operator control and monitoring of the drive system

This application example is valid for:
SIMATIC PCS 7 CPU 410-5H Process Automation, as of firmware V8.2
SIMATIC PCS 7 V9.0
SINAMICS S120 / S150 / G130 / G150, as of firmware V4.8

Example Library
https://support.industry.siemens.com/cs/attachments/109750296/109750296_Integration_of_Drive_Systems_via_PROFINET_in_PCS7_en.pdf
https://support.industry.siemens.com/cs/attachments/109750296/SINA_S120_lib.zip

GSDML File https://support.industry.siemens.com/cs/document/49217480/
CU S120 6SL3040-1xA0x-0xxx V4.6- V4.8
https://support.industry.siemens.com/cs/attachments/49217480/GSDML_V225_V231_V232_SINAMICS_S_CU3x0-20160531.zip