plc.myforum.ro

grig100 · Member 3 Joined: 01 Jan 2015 Posts: 752

SINAMICS S120: Cross-cutter application with DCB extension
https://support.industry.siemens.com/cs/document/109477746/sinamics-s120%3A-cross-cutter-application-with-dcb-extension
In order to allow various cut lengths (formats), the knife drive must have a motion profile, which during the cut moves the knife in synchronism with the belt – and outside the cutting range specifies suitable deceleration or acceleration rates before the velocity is synchronized again with the belt for the next cut. The saw is synchronized with the material using the position sensing function of an upstream feed drive or using a measuring wheel.

The cross-cutter application includes the following functions:

• Real leading axis /measuring wheel
• Virtual leading axis/test operation
• Measuring wheel correction
• Traversing to maintenance position
• Single cut
• Test cut
• Continuous cutting
• Cutting curve
• Jogging
• Flying homing for following axis and real leading axis
• Homing for following axis and real leading axis
• Print mark correction on the leading axis side
• Multi-knife systems
• Positioning for the real leading axis as well as autonomously, for the following axis
• Dead time compensation
• Following error monitoring
• Speed/torque precontrol

SINAMICS S120: Cross-cutter application with DCB extension SINAMICS S120: Cross-cutter application with DCB extension

SINAMICS S120: Cross-cutter application with DCB extension SINAMICS S120: Cross-cutter application with DCB extension

Manuals
S120 Cross Cutter 12/2015 (3,6 MB)
https://support.industry.siemens.com/cs/attachments/109477746/109477746_S120_Cross-cutter_V1_20_en.pdf
FH DCB Extension libraries 06/2015 (1,4 MB)
https://support.industry.siemens.com/cs/attachments/109477746/FH_DCB_Extension_libraries_V1_0_en.pdf
Software
CrossCutter Cam editor V1.1 .xlsm (3,6 MB)
https://support.industry.siemens.com/cs/attachments/109477746/109477746_CrossCutter_Cam_editor_V1_1.xlsm
Registrierung notwendig S120 Cross-cutter V1.20 XML Export (379,2 KB)
https://support.industry.siemens.com/cs/attachments/109477746/109477746_S120_Cross-cutter_V1_20_XML_Export.zip
GMCV3.1 SINAMICS 4.7 (565,3 KB)
https://support.industry.siemens.com/cs/attachments/109477746/GMCV3_1_sinamics4_7.zip
math extended V1.0 sinamics 4.7.zip (173,1 KB)
https://support.industry.siemens.com/cs/attachments/109477746/math_extendedV1_0_sinamics4_7.zip

For control of this application the SIMATIC library LMCSINA is available
LMCSINA library V2.1 09/2015 (german) (2,1 MB)
https://support.industry.siemens.com/cs/attachments/109477746/LMCSINA_library_V2_1_de.pdf
LMCSINA library V2.1 (2,0 MB)
https://support.industry.siemens.com/cs/attachments/109477746/LMCSINA_V2_1_HF2.zip

gert · Member 3 Joined: 02 Jan 2015 Posts: 645

SINAMICS S120 DCB library “GMC” and “Math Extended”
https://support.industry.siemens.com/cs/document/72839973/
Applications
Based on these additional libraries, the following application examples are available:
Function overview synchronism applications:
SINAMICS S120: Cross-cutter application with DCB extension SINAMICS S120: Cross-cutter application with DCB extension

Function manual drive function (FH1)
https://support.industry.siemens.com/cs/document/99472695/
Further Information
https://support.industry.siemens.com/cs/document/74924161/
SINAMICS S120: Cross-cutter application with DCB extension SINAMICS S120: Cross-cutter application with DCB extension

Information for Downloads
SINAMICS S120: Cross-cutter application with DCB extension SINAMICS S120: Cross-cutter application with DCB extension

Downloads
For SINAMICS 4.7
https://support.industry.siemens.com/cs/attachments/72839973/FH_DCB_Extension_libraries_V1_0_en.pdf
https://support.industry.siemens.com/cs/attachments/72839973/GMCV3_1_sinamics4_7.zip
For SINAMICS 4.8
https://support.industry.siemens.com/cs/attachments/72839973/FH_DCB_Extension_libraries_V4_2_en.pdf
https://support.industry.siemens.com/cs/attachments/72839973/GMCV4_2_sinamics4_8.zip
Common Downloads
https://support.industry.siemens.com/cs/attachments/72839973/math_extendedV1_1_sinamics4_7.zip

gert · Member 3 Joined: 02 Jan 2015 Posts: 645

SINAMICS S120: Linear flying saw application with DCB extension
https://support.industry.siemens.com/cs/document/109477745/
The flying saw application includes the following functions:

gert · Member 3 Joined: 02 Jan 2015 Posts: 645

SINAMICS S120: Cross-cutter application with DCB extension
https://support.industry.siemens.com/cs/document/109477746/
In order to allow various cut lengths (formats), the knife drive must have a motion profile, which during the cut moves the knife in synchronism with the belt – and outside the cutting range specifies suitable deceleration or acceleration rates before the velocity is synchronized again with the belt for the next cut. The saw is synchronized with the material using the position sensing function of an upstream feed drive or using a measuring wheel.
The cross-cutter application includes the following functions: