plc.myforum.ro Forum Index plc.myforum.ro
PLCs users www.plc.myforum.ro!
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SINAMICS S: DCC Winder

 
Post new topic   Reply to topic    plc.myforum.ro Forum Index -> Drives & Inverters
View previous topic :: View next topic  
Author Message
maersk
Member 3
Member 3
maersk

Joined: 17 Aug 2014
Posts: 891
PostPosted: 22/04/2016 20:32    Post subject: SINAMICS S: DCC Winder Reply with quote
DCC Winder

The standard package SINAMICS S DCC Winder is providing applications for un- and rewinders, e.g. for converting machines, film equipment, printing machines, coating systems, spooling systems or textile machinery. Features: Diameter calculation, dancer-roll or load-cell tension control, indirect tension control, taper tension, torque pre-control.

SINAMICS S: DCC Winder SINAMICS S: DCC Winder

https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_Wickler_en_V4_0.pdf
https://support.industry.siemens.com/cs/attachments/38043750/winder-checklist_v4-0.pdf
https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_winder_charts_V4_0.zip
https://support.industry.siemens.com/cs/attachments/38043750/38043740_DCC_winder_script_V4_0.zip
SIMATIC Library "Library Motion Control SINAMICS" – LMCSINA
https://support.industry.siemens.com/cs/attachments/38043750/109479491_LMCSINA_V2_3_en.pdf
https://support.industry.siemens.com/cs/attachments/38043750/109479491_LMCSINA_library_V2_3_0.zip
Back to top
View user's profile Send private message
maersk
Member 3
Member 3
maersk

Joined: 17 Aug 2014
Posts: 891
PostPosted: 02/12/2016 20:22    Post subject: SINAMICS S: DCC Winder Reply with quote
SINAMICS S: DCC Winder
Downloads DCC Winder
https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_Winder_en_V4_1.pdf
https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_Winder_chart_exports.zip

DCC Winder with Splicecontrol
https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_Winder_Splice_en_V4_1.pdf
https://support.industry.siemens.com/cs/attachments/38043750/38043750_DCC_Winder_splice_chart_exports.zip
https://support.industry.siemens.com/cs/attachments/38043750/FH_DCB_Extension_libraries_V4_0_en.pdf
https://support.industry.siemens.com/cs/attachments/38043750/GMCV4_0_sinamics4_8.zip

Common Downloads
https://support.industry.siemens.com/cs/attachments/38043750/slides_sinamics-dcc-winder_v4_1.pdf
https://support.industry.siemens.com/cs/attachments/38043750/Projectassistant_Winderenglishgerman_V1_0.zip
https://support.industry.siemens.com/cs/attachments/38043750/109479491_LMCSINA_V2_3_en.pdf
https://support.industry.siemens.com/cs/attachments/38043750/38043740_DCC_winder_script_V4_1.zip
https://support.industry.siemens.com/cs/attachments/38043750/winder-checklist_v4-1.pdf
Back to top
View user's profile Send private message
grig100
Member 3
Member 3
grig100

Joined: 01 Jan 2015
Posts: 752
PostPosted: 14/12/2016 14:42    Post subject: SINAMICS S telegram configuration online Reply with quote
How can the telegram configuration be performed online for SINAMICS S drives in STARTER V4.5 SP1?
The input fields for the telegram configuration types for SINAMICS S drives are grayed-out in the online state for the Control Units and drives (axes) in the "Communication -> Telegram configuration" mask in STARTER V4.5 SP1 (see screenshot).
SINAMICS S: DCC Winder SINAMICS S: DCC Winder
Fig. 1 - Telegram configuration for SINAMICS S drives online

Note
The telegram configuration in STARTER V4.5 SP1 for SINAMICS S drives is possible in the offline project.

Remedy for the online state
The telegram configuration for SINAMICS S drives can be set in STARTER V4.5 SP1 in the online state via the expert list in parameter p0922.
SINAMICS S: DCC Winder SINAMICS S: DCC Winder
Fig. 2 – Set the telegram configuration online via the expert list (p0922)
Back to top
View user's profile Send private message
grig100
Member 3
Member 3
grig100

Joined: 01 Jan 2015
Posts: 752
PostPosted: 03/03/2017 16:29    Post subject: Reply with quote
SINAMICS S: DCC Load Sharing
https://support.industry.siemens.com/cs/document/38470057/sinamics-s%3A-dcc-load-sharing
The standard SINAMICS S DCC Load Sharing application implements the mechanical coupling and load distribution of systems involving two or several motors

SINAMICS S: DCC Winder SINAMICS S: DCC Winder

https://support.industry.siemens.com/cs/attachments/38470057/DCC_LoadSharing_V2-0_en.pdf
https://support.industry.siemens.com/cs/attachments/38470057/LSSlaveEN-2-0.zip

SIMOTION/SINAMICS/SIMATIC Converting Diagnostic web sites
https://support.industry.siemens.com/cs/document/109474896/simotion-sinamics-simatic-converting-diagnostic-web-sites

The diagnostic pages allow defined converting application variables to be monitored and diagnosed. The connection to the diagnostic pages is established by using a standard web browser. The selected function can be monitored and diagnosed using the configured status variables. Additional software (engineering system, HMI runtime) is not required on the computer being used for diagnostics.

SINAMICS S: DCC Winder SINAMICS S: DCC Winder

https://support.industry.siemens.com/cs/attachments/109474896/Manual_Converting_Diagnostic_Pages_en_V1.1.0.pdf
https://support.industry.siemens.com/cs/attachments/109474896/Manual_SIMOTION_IT_Frame_en_V1.0.pdf
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    plc.myforum.ro Forum Index -> Drives & Inverters All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro