 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
gert
Member 3
Joined: 02 Jan 2015
Posts: 645
|
 Posted: 17/09/2019 14:15 Post subject: SIMATIC S7-based Telecontrol via DNP3- and IEC 60870-5-Proto |
 |
|
SIMATIC S7-based Telecontrol via DNP3- and IEC 60870-5-Protocol
https://support.industry.siemens.com/cs/document/87447188/
The control station communicates with the outstations via Ethernet using the DNP3 and IEC 60870-5 telecontrol protocol.
Overview of the application example
Three outstations are connected to a control center. Various products from the SIMATIC portfolio are used.
The outstations are available in 3 versions:
S7‑1500 with TIM 1531 IRC
S7‑1200 with CP 1243‑1
ET 200SP (based on S7-1500) with CP 1542SP‑1 IRC
The WinCC TeleControl software is installed at the control station, making the control station the DNP3- or IEC 60870-5-master.
Downloads tia 15.1
https://support.industry.siemens.com/cs/attachments/87447188/87447188_DNP3_Telecontrol_DOC_V20_en.pdf
https://support.industry.siemens.com/cs/attachments/87447188/87447188_DNP3_Telecontrol_CODE_V20.zip
https://support.industry.siemens.com/cs/attachments/87447188/87447188_IEC_Telecontrol_DOC_V20_en.pdf
https://support.industry.siemens.com/cs/attachments/87447188/87447188_IEC_Telecontrol_CODE_V20.zip |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
