plc.myforum.ro

valz · Member 3 Joined: 26 Jul 2015 Posts: 771

SIMATIC Automation Tool V4.0 SP3 UPD1
https://support.industry.siemens.com/cs/document/98161300/
After a control program is created and verified with the Siemens TIA Portal software, the SIMATIC Automation Tool can be used in the field for operating and maintaining SIMATIC S7-1200, S7-1500, ET 200, HMI, SITOP, SCALANCE switches, RFID and MOBY Ident modules.

Automation Tool operations:
Scan a PROFINET/Ethernet network and identify all devices connected to the network
Flash device LEDs or HMI screens to physically locate a device
Create a table that maps the accessible devices on the network
Assign addresses (IP, subnet, gateway) and station name (PROFINET device)
Set the time in a CPU to the current time in your PG/PC
Download a program to a CPU and HMI panels
Put a CPU in RUN or STOP mode
Perform a CPU Memory reset

Backup/Restore CPU or HMI data to/from a backup file
Upload service data from a CPU
Upload of service data from ET200 devices
Read the diagnostics buffer from a CPU
Reset a CPU to factory default settings
Update firmware in a CPU and attached modules
Ability to load firmware update files on devices and activate the new firmware later
Support for CPUs connected through a CM (Communications Module) or CP (Communications Processor)
Upload, download, or delete Recipe data (stored at SMC) from a CPU
Upload or delete Data log data (stored at SMC) from a CPU
Information in Device table for CPUs: TIA Portal version and configured CPU version
Document and save your network information
In a standard text .csv file or
An encrypted & password protected .sat file
Use the API to create custom .NET applications based on the functionality available in the SIMATIC Automation Tool
Advanced features:
Up to 10 concurrent connections.
Scheduler for scheduling device operations on a time and frequency of your choosing
Card browser for working with files and folders on SIMATIC memory cards in your CPUs
Archiving capabilities for SAT projects and associated file data
Ability to insert multiple devices in one operation
Support for devices behind a NAT router
Download
https://support.industry.siemens.com/cs/attachments/98161300/SIMATIC_Automation_Tool_V4_0_SP3_UPD1.exe
https://support.industry.siemens.com/cs/attachments/98161300/SAT_DeviceCatalog_V4.0_SP3_UPD1.xlsx
https://support.industry.siemens.com/cs/attachments/109801801/SAT.UserGuide.V4.0.SP3.en-US_en-US.pdf
https://support.industry.siemens.com/cs/attachments/109811990/SAT.InstallationNotes.V4.0.SP3.en-US_en-US.pdf

https://ulozto.net/file/oJ8FDlYRmp7k/simatic-automation-tool-v4-0-sp3-upd1-exe

[URL=https://veryfiles.com/j7guml60y31b]SIMATIC_Automation_Tool_V4_0_SP3_UPD1.exe - 432.2 MB[/URL]

curbila don · Junior Joined: 22 Jul 2023 Posts: 1

mamiko · Member 2 Joined: 25 Dec 2017 Posts: 420

SIMATIC Automation Tool V05.00.01.00

Download
https://support.industry.siemens.com/cs/attachments/98161300/SIMATIC_Automation_Tool_V5_0_SP1.exe

https://teraboxapp.com/s/1kkvm54y9wU9bFULoIsOEBg

Faisal Ahmed · Junior Joined: 27 Oct 2023 Posts: 5

simaticus · Junior Joined: 03 Jan 2013 Posts: 11

Please upload free share, z.b.:

https://zippyshares.net
https://www.upload.ee

Myjhyka · Junior Joined: 13 Nov 2023 Posts: 3

SIMATIC Automation Tool V5.0 SP1 UPD1
https://support.industry.siemens.com/cs/document/98161300/

https://mega.nz/file/CZxTFYaL#xlA8PHU9sGHkUoB2h2ORqRbqIq4i6wWBHzxultq6Zgs

simaticus · Junior Joined: 03 Jan 2013 Posts: 11

Thank You