 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
maersk
Member 3
Joined: 17 Aug 2014
Posts: 891
|
 Posted: 18/05/2018 12:52 Post subject: Siemens Traffic Shaper |
 |
|
Siemens Traffic Shaper
To prevent peak loads and data loss, the Siemens Traffic Shaper is a helpful tool. Through the Siemens Traffic Shaper, data packets originating from a network card can be limited according to predetermined maximum values
In networks, unpredictable load peaks can occur. As a result, data packets can be discarded. Therefore, data packets that are necessary for an application might not arrive at the destination, for example.To prevent peak loads, the Siemens Traffic Shaper is a helpful tool. Through the Siemens Traffic Shaper, data packets originating from a network card can be limited according to predetermined maximum values. If the network load is above the specified maximum value, the network load is distributed so that the data packets are sent only in phases of lower network utilization.
The Siemens Traffic Shaper offers the following advantages:
With correct planning, no data packages can be lost..
A high priority data flow cannot be disturbed by a lower priority data flow.
Application example
This application example shows you how to use the Siemens Traffic Shaper.
To demonstrate the functionality, a SIMATIC MICROBOX PC and a PG/PC are used. These two devices communicate with each other. The data originating from the MICROBOX PC with the PG/PC as destination is generated by a load generator. In this application example, the tool "JPerf" is used. In parallel, a camera permanently transmits a live video stream to the PG/PC. The PG/PC displays the video stream in a picture playback application. The Siemens Traffic Shaper is used so that the live video playback is not disturbed by the communication between MICROBOX PC and PG/PC.
The Siemens Traffic Shaper is installed on the MICROBOX PC and controls the interface to the network. This interface routes traffic to the network.
You can use the Siemens Traffic Shaper only with a SIEMENS IPC.
https://support.industry.siemens.com/cs/attachments/109750661/109750661_TrafficShaper_DOC_V10_en.pdf
https://support.industry.siemens.com/cs/attachments/109750661/ReadMe.zip
https://support.industry.siemens.com/cs/attachments/109750661/SIMATIC_TRAFFICSHAPER_V1.zip |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
