plc.myforum.ro

manisha · Member junior Joined: 16 Jan 2016 Posts: 98

SCADA Data Gateway Wind Integration with IEC 61400-25 Triangle MicroWorks

The SCADA Data Gateway (SDG) is a Windows™ application used by System Integrators and Utilities to collect data from OPC, IEC 60870-6 (TASE.2/ICCP), IEC
61850, IEC 60870-5, DNP3, or Modbus Server/Slave devices and then supplies this data to other control systems supporting OPC, IEC 60870-6 (TASE.2/ICCP)
Client, IEC 60870-5, DNP3, and/or Modbus Client/Master communication protocols.

SCADA Data Gateway Wind Integration with IEC 61400-25 SCADA Data Gateway Wind Integration with IEC 61400-25

SCADA Data Gateway Wind Integration with IEC 61400-25 SCADA Data Gateway Wind Integration with IEC 61400-25

Wind Integration with IEC 61400-25
The SCADA Data Gateway supports the integration of wind power plants through the international standard IEC 61400-25. This allows monitoring and control of wind resources through standard communication protocols.
Single Solution - translate directly between SCADA protocols like DNP3, IEC 60870-5 (IEC 101, IEC 104), IEC 61850, or Modbus with better reliability rather than using numeroase OPC drivers
Protocol Mapping - support for monitoring and control point mappings as defined by IEC 61400-25-4 including protocols DNP3, IEC 60870-5-104, and IEC 61850 IEC 61850 Data Models - support for wind data models including common data classes, data objects, and logical nodes
Large Number of Points - Up to 30,000 points and 250 connections can be supported Security - Authentication and TLS encryption is supported for IEC 61850, DNP3, and IEC 60870-5-104

SCADA Data Gateway Wind Integration with IEC 61400-25 SCADA Data Gateway Wind Integration with IEC 61400-25

Performs the work of an OPC Server or Protocol Translator.
Translate between any number of available protocols.
Includes a protocol analyzer.
Built in equation editor supports the creation of new data points based on raw data points and /or other equation points.
OPC Certified™; Conformance tested per DNP3 Intelligent Electronic Device (IED) Certification Procedure Subset Level2, Rev. 2005).
Report by Exception (RBE) is supported (transmitting only data changes, saving communication channel bandwidth).
Supports DNP3 Secure Authentication.
Supports selective logging of event data into a time-stamped Sequence of Events (SOE) log file.
The Communication Protocol Analyzer Window displays and decodes transmitted and received messages.
Allows translation between data types and control methods from different protocols. Supports mapping of points between Master and Slave, two Master, and/or two Slave protocol components.

demos:
[URL=https://userscloud.com/oeslb3425zfr]DNP3Forgev1.4.6177.rar - 37.3 MB[/URL]
[URL=https://userscloud.com/lo6idb1aqcz9]TMW.SCL.Setup.3.22.rar - 72.6 MB[/URL]
[URL=https://userscloud.com/koj8cr3jderc]SDGv3.06.0015.rar - 76.7 MB[/URL]
[URL=https://userscloud.com/s6bw6ywnfge4]IronInstall4.3.0.rar - 120.7 MB[/URL]
[URL=https://userscloud.com/i2zkc6ddmxzg]i61850NETInstall_3_8.rar - 47.4 MB[/URL]
[URL=https://userscloud.com/4t75guyd3yd1]DTMInstallv1.2.1.9.rar - 123.3 MB[/URL]
[URL=https://userscloud.com/pgodvdl2e4f7]TMWTestSuitePro4.0.2.rar - 126.4 MB[/URL]
[URL=https://userscloud.com/k6hnqjjxn2xl]thv3.22.0000.rar - 123.5 MB[/URL]
[URL=https://userscloud.com/qm9tzkfhvlpt]cLIB_Evaluation11.0.3.rar - 67.7 MB[/URL]
[URL=https://userscloud.com/18jaud0idkzl]IEC61850TestSuiteInstall3.9.1.rar - 139.1 MB[/URL]
How to download
http://plc.myforum.ro/why-to-use-https-userscloudcom--vt8286.html