plc.myforum.ro

mojo · Senior Joined: 01 Oct 2011 Posts: 2404

SALOME 6.5.0-Open Source for Numerical Simulation
Page:
http://www.salome-platform.org/
Note, that 64bit Windows is not supported.
If you want to work on 64bit OS then you need Linux distribution(See below)
What is SALOME?
SALOME is an open-source software that provides a generic platform for Pre- and Post-Processing for numerical simulation. It is based on an open and flexible architecture made of reusable components.

SALOME is a cross-platform solution. It is distributed as open-source software under the terms of the GNU LGPL license.
You can download both the source code and the executables from this site.

SALOME 6.5.0-Open Source for Numerical Simulation SALOME 6.5.0-Open Source for Numerical Simulation

SALOME 6.5.0-Open Source for Numerical Simulation SALOME 6.5.0-Open Source for Numerical Simulation

How SALOME can be used?
SALOME can be used as standalone application for generation of CAD models, their preparation for numerical calculations and post-processing of the calculation results.
SALOME can also be used as a platform for integration of the external third-party numerical codes to produce a new application for the full life-cycle management of CAD models.

Download a binaries archive for 32bit Windows
This archive provides only minimal content required to run SALOME (no development files). It is intended for the users who don't need to compile SALOME or third-party code, but only want to run SALOME application. The archive includes binaries of the pre-requisites and SALOME modules built in RELEASE mode.
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=WinBin&version=6.5.0

Download a development environment archive, RELEASE mode for 32bit Windows (538Mb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=WinDevRel&version=6.5.0
Download a development environment archive, DEBUG mode for 32bit Windows (904Mb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=WinDevDeb&version=6.5.0
These archives provide "development environment" of SALOME. They include binaries (built in RELEASE and DEBUG modes separately) of the pre-requisites and SALOME modules plus all files (headers, IDL files, adm files etc) required for the compilation of the third-party code (e.g. SALOME-based modules).

Download a SALOME SDK archive for 32bit Windows (1Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=WinSDK&version=6.5.0
This archive includes pre-requisites built in both DEBUG and RELEASE modes, SALOME modules sources and build procedure (environment files + build scripts). It can be used to build SALOME and/or third-party code from sources.
Note, that it does not conține SALOME binaries.

Download only SALOME 6.5.0 sources(170Mb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Sources&version=6.5.0
Download only SALOME 6.5.0 documentation (219Mb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Documentation&version=6.5.0

Online documentation of latest SALOME release is available here:
http://www.salome-platform.org/user-section/documentation/current-release

Supported platforms, prerequisites and software requirements (108Kb)
http://files.salome-platform.org/Salome/Salome6.5.0/SALOME_6_5_0_Prerequisites.pdf

SALOME platform is freely available under the terms of the GNU Lesser General Public License (LGPL) version 2.1.
http://www.salome-platform.org/downloads/license

Binaries for officially supported Linux platforms (Installation Wizard):
Download a complete version for Debian 4.0 Etch 32bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Debian_4.0&version=6.5.0
Download a complete version for Debian 4.0 Etch 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Debian_4.0&version=6.5.0_64bit
Download a complete version for Debian 5.0 Lenny 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Debian_5.0&version=6.5.0_64bit
Download a complete version for Debian 6.0 Squeeze 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Debian_6.0&version=6.5.0_64bit
Download a complete version for Mandriva 2008 32bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Mandriva_2008.0&version=6.5.0
Download a complete version for Mandriva 2008 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Mandriva_2008.0&version=6.5.0_64bit
Download a complete version for Mandriva 2010 32bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Mandriva_2010.0&version=6.5.0
Download a complete version for Mandriva 2010 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=Mandriva_2010.0&version=6.5.0_64bit
Download a complete version for Red Hat Enterprise 4 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=RHEL_4.0&version=6.5.0_64bit
Download a complete version for Scientific Linux 5.1 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=SL_5.1&version=6.5.0_64bit
Download a complete version for CentOS 5.5 64bit (1,5Gb)
http://www.salome-platform.org/downloads/current-version/DownloadDistr?platform=CentOS_5.5&version=6.5.0_64bit