| View previous topic :: View next topic |
| Author |
Message |
aliibrahimxx
Junior 2
Joined: 01 Jul 2019
Posts: 38
|
 Posted: 05/08/2020 08:05 Post subject: Rslogix Emulator |
 |
|
Good afternoon!
I am having an issue with creating a controller in the emulator. I have set up RSLinx and can see the server, the Linx "ethernet" connection and any of the I/O modules I create but when I go to create the controller it appears on the emulator graphic but has a big red X over it and says controller not responding. It also does not appear in the drop down menu under the virtual back plane in RSlinx.
Things I have done:
1. Reassign RSlinx server from slot 0 to slot 6 so I could put the controller in zero. No change other than the position of the server in RSLinx and on the emulator graphic
2. I have created I/O modules in every slot to make sure they would work and appear in both the emulator and RSlinx. I/O and server will appear and work in any slot that I can put them in. Controller fails in the same manner regardless of slot or configuration.
I am at a loss as to why I can't get the controller in an emulator to work. I have done this a dozen times before and this has me stumped. Any help would be greatly appreciated. |
|
| Back to top |
|
 |
aliibrahimxx
Junior 2
Joined: 01 Jul 2019
Posts: 38
|
| Posted: 05/08/2020 19:11 Post subject: |
|
|
i did everything like the videos u posted, i was simulating yesterday fine
but today i do not know what happened i did not change any configuration or anything |
|
| Back to top |
|
|
aliibrahimxx
Junior 2
Joined: 01 Jul 2019
Posts: 38
|
| Posted: 07/08/2020 14:56 Post subject: |
|
|
| up |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
