plc.myforum.ro

matias21033 · Junior Joined: 07 Jun 2017 Posts: 1

I need to make an upgrade from TSX CPU P57303 to M580. I will add a rack with the cpu and communication modules and leave the actual racks with TSX I/O modules:

Actual Configuration:

Rack #0
PSY 5500M - TSX 57303 - ETY 4103 - SCY 21601 - DEY64D2K - DEY64D2K - DEY64D2K - AEY 810 - AEY 810

Rack #1
PSY5500 - DSY64T2K - DSY64T2K - DSY64T2K - DSY64T2K - ETY 4103

Future Configuration

Rack #0
CPS 4002 - eP582040 - NOM 0200.2

Rack #1
PSY 5500M - DEY64D2K - DEY64D2K - DEY64D2K - DEY64D2K - AEY 810 - AEY 810

Rack #2
PSY5500 - DSY64T2K - DSY64T2K - DSY64T2K - DSY64T2K

I was able to migrate the original project from PL7PRO to Unity Pro XL v13. However, I can't delete the P57303 cpu and add the rack #0 with the eP582040 CPU.

I've created a new project selecting the eP582040 and add correctly the TSX modules in racks #1 and #2.

The question is how to migrate all the information from one project to another.

Any other recommendation will be highly appreciated.

Thanks in advance

Matías
[/img]

Kaerbie Dohnj · Junior Joined: 02 Jul 2019 Posts: 3

https://www.schneider-electric.co.in/en/faqs/FA289143/

Converting a PL7 application into a Unity Pro application requires the following:
the application to be saved using PL7 ≥V4.3 software, all PL7 applications earlier than version 4.0 must be updated, before being converted into a Unity Pro application. To update a PL7 application, execute the following actions running PL7 ≥V4.3.
a level TSX ••• ••4 application processor,
the application, as well as the sections, functional modules and dfb's it contains to be unprotected,
the application source file to be exported and saved. (.fef)
Below steps for saving the pl7 application :-

1 Choose the Open command from the File menu.
2 Select the hard disk and/or directory containing the file to be opened.
3 Select the file to be opened; the name of this file then appears in the File Name field.
4 Confirm with Open.
5 In the Application Browser, double-click on the Configuration directory.
6 Double-click on the Hardware configuration sub-directory.
Result: The Configuration screen appears.
7 Select a version TSX ••• ••3 processor that is compatible with your application from the drop-down menu in the top left-hand corner of the Configuration screen.
Result: The Change Processor screen appears.
8 Confirm your selection with OK.
9 Select the Save command from the File menu.

To export a PL7 application, execute the following actions running PL7 ≥V4.3:

1 Select the Export application command from the File menu.
2 Select the disk and/or directory where the file must be stored.
3 Enter the file name in the Name field.
4 Confirm with Save.