| View previous topic :: View next topic |
| Author |
Message |
niuiqnep
Junior
Joined: 26 Oct 2012
Posts: 3
|
 Posted: 27/06/2015 04:33 Post subject: Redundancy RX3i PLC |
 |
|
Anyone Help me please..
I have problem for configuration Redundancy PLC RX3i CRU320 and communication to I/O module rack.
I try to solve the problem until now, I can communication to I/O module via EGD consumed and produced.
But for the redundancy between 2 PLC (Primary and Secondary) is not properly and I think is not redundancy also like a program PLC download to two PLC with copy program.
Anyone please help to download my program and check for me about this thing.
https://www.mediafire.com/?g6sv95528akstmr for program PLC
https://www.mediafire.com/?h7wwkso18nzsmul for figure config PLC
My module including (Primary & Secondary Rack)
- PLC CRU320
- RXM128
- ETM001
I need someone help to advice or guideline to me how to set the config or give me and a example to set redundancy RX3i PLC.
I try to read a lot of manual form GE support very confuse.
1. PACSystem Hot Standby CPU Redundancy GFK-2308C
2. PACSystems RX7i & RX3i TCPIP Ethernet Communications GFK-2224N
After I checked not sure in my module is use Non-HSB or not, from manual GFK-2224N page no. 25-26 said that is Non-HSB.
Please Please Please... |
|
| Back to top |
|
 |
grig100
Member 3
Joined: 01 Jan 2015
Posts: 752
|
| Posted: 27/06/2015 11:31 Post subject: Re: Redundancy RX3i PLC |
|
|
| niuiqnep wrote: | Anyone Help me please..
I have problem for configuration Redundancy PLC RX3i CRU320 and communication to I/O module rack.
I try to solve the problem until now, I can communication to I/O module via EGD consumed and produced.
But for the redundancy between 2 PLC (Primary and Secondary) is not properly and I think is not redundancy also like a program PLC download to two PLC with copy program.
Anyone please help to download my program and check for me about this thing.
https://www.mediafire.com/?g6sv95528akstmr for program PLC
https://www.mediafire.com/?h7wwkso18nzsmul for figure config PLC
My module including (Primary & Secondary Rack)
- PLC CRU320
- RXM128
- ETM001
I need someone help to advice or guideline to me how to set the config or give me and a example to set redundancy RX3i PLC.
I try to read a lot of manual form GE support very confuse.
1. PACSystem Hot Standby CPU Redundancy GFK-2308C
2. PACSystems RX7i & RX3i TCPIP Ethernet Communications GFK-2224N
After I checked not sure in my module is use Non-HSB or not, from manual GFK-2224N page no. 25-26 said that is Non-HSB.
Please Please Please... |
Try to find some answers from their site..or give them a call..
http://support.ge-ip.com/support/search/ui.jsp
How to Configure/Test S90 Triplex When Communicating with Redundant PLC's
http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB16523&actp=search |
|
| Back to top |
|
|
niuiqnep
Junior
Joined: 26 Oct 2012
Posts: 3
|
| Posted: 28/06/2015 15:52 Post subject: |
|
|
| Thank you for your advice.....grig100 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
