| View previous topic :: View next topic |
| Author |
Message |
gert
Member 3
Joined: 02 Jan 2015
Posts: 645
|
 Posted: 27/07/2016 21:41 Post subject: PtP instructions for use of ET 200MP/ET 200SP Step 7 V5.5 |
 |
|
PtP instructions for use of ET 200MP / ET 200SP in the distributed peripherals of a S7-300/400 with Step 7 V5.5
https://support.industry.siemens.com/cs/document/75226762/ptp-instructions-for-use-of-et-200mp-et-200sp-in-the-distributed-peripherals-of-a-s7-300-400-with-step-7-v5-5
The instructions for operating the communication modules CM PtP are integrated in Step 7 (TIA Portal). If you wish to use these modules in the distributed peripherals ET 200MP or ET 200SP on a SIMATIC S7-300/S7-400 and configure them in Step 7 V5.5, you can use the libraries included. ...
PtP Communication
https://support.industry.siemens.com/cs/attachments/75226762/Ptp_comm_V1.1.zip
MODBUS (RTU)
https://support.industry.siemens.com/cs/attachments/75226762/MODBUS_RTU.zip
USS Communication
https://support.industry.siemens.com/cs/attachments/75226762/USS_Comm.zip
https://support.industry.siemens.com/cs/attachments/69124220/s7300400_cm_ptp_programming_manual_en-US_en-US.pdf
The PtP communication instructions from the libraries can be executed on S7-300, S7-400 and WinAC CPUs.
They support the following modules:
ET 200MP
CM PTP RS422/485 BA 6ES7 540-1AB00-0AA0
CM PTP RS232 BA 6ES7 540-1AD00-0AA0
CM PTP RS422/485 HF 6ES7 541-1AB00-0AB0
CM PTP RS232 HF 6ES7 541-1AD00-0AB0
ET 200SP
CM PTP 6ES7 137-6AA00-0BA0
Software requirements
Before you can use the PtP communication instructions from the libraries, you must install SIMATIC STEP 7 V5.5 SP 3 or higher (not TIA Portal). |
|
| Back to top |
|
 |
gert
Member 3
Joined: 02 Jan 2015
Posts: 645
|
| Posted: 09/03/2017 14:42 Post subject: PtP instructions for use of ET 200MP / ET 200SP |
|
|
PtP instructions for use of ET 200MP / ET 200SP in the distributed peripherals of a S7-300/400 with Step 7 V5.5
https://support.industry.siemens.com/cs/attachments/75226762/PtP_Comm_V1_2.zip
https://support.industry.siemens.com/cs/attachments/75226762/Modbus_RTU_V1_2.zip
https://support.industry.siemens.com/cs/attachments/75226762/USS_Comm_V1_2.zip
PROFIBUS GSD files : ET 200MP
IM 155-5 DP ST V3.0 (Rev.5)
https://support.industry.siemens.com/cs/attachments/80206700/ET200MP_DP_ST_V30.zip
IM 155-5 DP ST V2.0 (Rev.5)
https://support.industry.siemens.com/cs/attachments/80206700/ET200MP_DP_ST_V20.zip
IM 155-5 DP ST V1.0 (Rev.5)
https://support.industry.siemens.com/cs/attachments/80206700/ET200MP_DP_ST_V10.zip
IM 155-5 DP ST V3.0 (Rev.3)
https://support.industry.siemens.com/cs/attachments/80206700/ET200MP_DP_ST_V30_Rev3.zip
PROFINET GSD files : ET 200MP
https://support.industry.siemens.com/cs/attachments/68189683/ET200MP_IM155-5.zip |
|
| Back to top |
|
|
valz
Member 3
Joined: 26 Jul 2015
Posts: 771
|
| Posted: 11/04/2018 14:39 Post subject: PtP instructions for use of ET 200MP / ET 200SP Step 7 V5.5 |
|
|
PtP instructions for use of ET 200MP / ET 200SP in the distributed peripherals of a S7-300/400 with Step 7 V5.5
https://support.industry.siemens.com/cs/document/75226762/
The instructions for operating CM PtP communication modules are integrated in Step 7 (TIA Portal). If you wish to use these modules in the distributed peripherals ET 200MP or ET 200SP on a SIMATIC S7-300/S7-400 and configure them in Step 7 V5.5, you can use the libraries included. ...
| Code: | Description:
The PtP communication instructions from the libraries can be executed on S7-300, S7-400 and WinAC CPUs.
They support the following modules:
ET 200MP
CM PTP RS422/485 BA 6ES7 540-1AB00-0AA0
CM PTP RS232 BA 6ES7 540-1AD00-0AA0
CM PTP RS422/485 HF 6ES7 541-1AB00-0AB0
CM PTP RS232 HF 6ES7 541-1AD00-0AB0
ET 200SP
CM PTP 6ES7 137-6AA00-0BA0
|
Installation
Open the SIMATIC Manager to install the PtP communication instructions in the SIMATIC block libraries. Under the menu item File -> Retrieve..., double-click one of the downloaded archives. Select in your Siemens\Step7 installation folder the directory S7LIBS as target directory and confirm with OK. Repeat these steps for further archives, if necessary. Depending on the scope of installation, the folders "PtP Communication", "MODBUS ( RTU )" and "USS Communication" have been created in the SIMATIC directory "Libraries".
PtP Communication PtP_Comm_V1_3.ZIP (107.0 KB)
https://support.industry.siemens.com/cs/attachments/75226762/PtP_Comm_V1_3.zip
MODBUS (RTU) Modbus_RTU_V1_3.ZIP (157.9 KB)
https://support.industry.siemens.com/cs/attachments/75226762/Modbus_rtu_V1_3.zip
USS Communication USS_Comm_V1_3.ZIP (152.3 KB)
https://support.industry.siemens.com/cs/attachments/75226762/Uss_comm_V1_3.zip
The block versions are as follows:
| Code: | PtP communication instructions from the PtP communication:
FB610 (Port_Config) V1.0
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.3
FB614 (Receive_P2P) V1.5
FB615 (Signal_Get) V1.0
FB616 (Signal_Set) V1.0
FB617 (Receive_Reset) V1.0
FB618 (Get_Features) V2.0
FB619 (Set_Features) V2.0
FB620 (P3964_Config) V1.1
PtP communication instructions from MODBUS (RTU):
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.3
FB614 (Receive_P2P) V1.5
FB617 (Receive_Reset) V1.0
FB640 (Modbus_Comm_Load) V3.0
FB641 (Modbus_Master) V1.3
FB642 (Modbus_Slave) V1.2
PtP communication instructions from the USS communication:
FB610 (Port_Config) V1.0
FB611 (Send_Config) V1.0
FB612 (Receive_Config) V1.0 / UDT580 (Receive_Conditions) V1.0
FB613 (Send_P2P) V1.3
FB614 (Receive_P2P) V1.5
FB630 (USS_Port_Scan) V2.1
FB631 (USS_Drive_Control) V1.0
FC632 (USS_Read_Param) V1.0
FC633 (USS_Write_Param) V1.0
|
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
