| View previous topic :: View next topic |
| Author |
Message |
kalkan Member


Joined: 30 Dec 2011 Posts: 198
|
Posted: 30/12/2011 22:40 Post subject: Project with Step7 V11 |
|
|
Could someone upload a project example with Step7 V11...
Please... |
|
| Back to top |
|
 |
rott Senior

Joined: 23 Aug 2011 Posts: 2266
|
Posted: 02/01/2012 13:52 Post subject: Re: Project with Step7 10.5 SP2 |
|
|
| kalkan wrote: | Could someone upload a project example with Step7 V11...
Please... |
Hi Kalkan,
Here is a real program dedicated to a hydraulic accumulator.
The main goal of this program is to detect the minimum and the maximum levels in accumulator and also for signaling the intermediate levels.
There are two levels No.1 and No.6 which START respectively STOP the hydraulic pumps. The real application it's a little bit more complicated but this is the application for controlling the liquid level in a hydraulic accumulator.
There are some interesting programs here: The Filter which has the mission to delay a little bit (see timers) the final value because of some turbulence on the level (the accumulator is pretty tall 10m, and has a relative pressure of about 400 bar )
See also the scaling of Analog Input which is a self authoring FC.
The level in the accumulator is measured with a Differential Pressure Transducers from Aplisens (Poland) for 10m level H2O.
http://www.aplisens.pl/en/index.html
The project must be opened with Step7 Basic 10.5 SP2 you can download on
http://plc.myforum.ro/simatic-step-7-basic-v105-vt12.html.
You also have a KPT 600PN HMI in which the levels are indicated...
You can download the project here:
https://rapidshare.com/files/4099865443/AccFG.rar
If you need assistance for developing a similar real project I can
give all the assistance needed..
Enjoy... |
|
| Back to top |
|
 |
nguyen xuan khanh Member

Joined: 16 May 2012 Posts: 170
|
Posted: 13/04/2014 05:17 Post subject: Fwd: |
|
|
| Dear Rott, files have been deleted, can you please re-upload ? |
|
| Back to top |
|
 |
|