| View previous topic :: View next topic |
| Author |
Message |
diegoac
Junior
Joined: 13 May 2012
Posts: 5
|
 Posted: 03/10/2017 04:31 Post subject: Problem converting a PanelBuilder project to a FTView Me pro |
 |
|
Hello,
I've got a problem when converting my old PanelBuilder aplication to the new FTView ME plataform due to the need of replacing my PanelView Plus 600 to a new one. The problems i mean are related with some alarm issues that i cant undestand.
The first warning message i got was:
Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
So, what does it mean? What may occur if i don't treat this warning?
The second warning message i got was:
Alarm message Ack option not supported.
How to fix this warning? I won't be able to acknowlegde my alarms?
Also about the above question, the migrating manual says:
In PanelBuilder32 software, the alarm ACK is on an individual message.
FactoryTalk View ME software does not support individual
acknowledgement of alarms. The alarm Ack is on the triggers.
But i didnt undestand neither found a solution to this warning.
Thanks in advance. |
|
| Back to top |
|
 |
oleksa
Member
Joined: 27 Dec 2013
Posts: 123
|
| Posted: 04/10/2017 07:16 Post subject: Re: Problem converting a PanelBuilder project to a FTView Me |
|
|
| diegoac wrote: | Hello,
I've got a problem when converting my old PanelBuilder aplication to the new FTView ME plataform due to the need of replacing my PanelView Plus 600 to a new one. The problems i mean are related with some alarm issues that i cant undestand.
The first warning message i got was:
Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
So, what does it mean? What may occur if i don't treat this warning?
The second warning message i got was:
Alarm message Ack option not supported.
How to fix this warning? I won't be able to acknowlegde my alarms?
Also about the above question, the migrating manual says:
In PanelBuilder32 software, the alarm ACK is on an individual message.
FactoryTalk View ME software does not support individual
acknowledgement of alarms. The alarm Ack is on the triggers.
But i didnt undestand neither found a solution to this warning.
Thanks in advance. |
What version PanelBuilder project to what version of FTView Me pro? |
|
| Back to top |
|
|
diegoac
Junior
Joined: 13 May 2012
Posts: 5
|
| Posted: 08/10/2017 11:47 Post subject: |
|
|
Hello oleksa. Thanks for answering.
PanelBuilder32 3.80
FTView Studio 6.00 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
