 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
gert
Member 3
Joined: 02 Jan 2015
Posts: 645
|
 Posted: 09/11/2017 11:14 Post subject: Positioning to Print Marks with SINAMICS V90 and S7-1200 (TO |
 |
|
Positioning to Print Marks with SINAMICS V90 and SIMATIC S7-1200 (TO)
https://support.industry.siemens.com/cs/document/109749356/
A sensor detects print marks on a band feed. The positions of these print marks are stored with a SIMATIC S7-1200 and are intended for positioning a SINAMICS V90.
The TIA Portal V14 enables the control of a SINAMICS V90 drive via the pulse/direction interface (PTO). For this purpose, the SINAMICS drive can be configured in a SIMATIC S7-1200 controller as technology object and can be operated using Motion Control instructions.
In this application example, a cutting device is implemented. For this, print marks on a band have to be detected and their position has to be stored as setpoint values for positioning the band. The band is positioned by means of a SINAMICS V90.
Documentation and Project
https://support.industry.siemens.com/cs/attachments/109749356/109749356_V90_print_mark_DOCU_V1d0_en.pdf
https://support.industry.siemens.com/cs/attachments/109749356/109749356_V90_print_mark_V14_SP1.zip |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
