plc.myforum.ro

danayany · Junior Joined: 03 Dec 2018 Posts: 4

hi
i want know about profinet industrial ethernet.
i want know : can i used profinet instead of cp 443-1 ?
by means i want making a network like named connection in pcs7 v8.2 without cp 443-1 and with profinet.
i have a pair of 416-5h and 2 os that each os hase 1 cp 1623 and i want make reduandant network with the sistem.
can i used profinet port on cpu instead of cp443-1?
tnx

Esteban Raha · Junior Joined: 09 May 2019 Posts: 2 Location: Sevilla

PROFINET in Process Automation with SIMATIC PCS 7
https://support.industry.siemens.com/cs/document/72887082/profinet-in-process-automation-with-simatic-pcs-7

Function Overview of PROFINET Devices in SIMATIC PCS 7
https://support.industry.siemens.com/cs/document/109747976/function-overview-of-profinet-devices-in-simatic-pcs-7
New Primary Setup Tool (PST) version V4.2 HF1, 4.2 and 4.1 for setting addresses of SIMATIC NET Industrial Ethernet products available as download
https://support.industry.siemens.com/cs/document/19440762/new-primary-setup-tool- (pst)-version-v4-2-hf1-4-2-and-4-1-for-setting-addresses-of-simatic-net-industrial-ethernet-products-available-as-download
PRONETA 2.6.0.7 Commissioning and Diagnostics Tool for PROFINET
https://support.industry.siemens.com/cs/document/67460624/proneta-2-6-0-7-commissioning-and-diagnostics-tool-for-profinet
SINEMA Server V14 SP1 software (including 21-day trial license) download
https://support.industry.siemens.com/cs/document/109761825/sinema-server-v14-sp1-software- (including-21-day-trial-license)-download
PROFINET Bus Analyzer
https://support.industry.siemens.com/cs/document/109745817/profinet-bus-analyzer

danayany · Junior Joined: 03 Dec 2018 Posts: 4

tnx Esteban Raha
but i want know how can i make redundant ethernet with profinet btween ES (engineering Station ) OS (operating Station) with redundant AS (CPU416-5h)?

Esteban Raha · Junior Joined: 09 May 2019 Posts: 2 Location: Sevilla

When using a configuration with system redundancy, all IO devices must support system redundancy.
With the MRP protocol, you can create a ring structure without the use of additional switches. One device takes the role of redundancy manager. The telegram direction is normally clockwise, but when one device fails, the redundancy manager will reconfigure the network and the telegram direction is set anticlockwise. It is possible to take into account two CPU's. So if one fails, the other is still reachable.
You can configure the MRP protocol in Step7 and system diagnosis.
You must comply the following rules when you want to use MRP:
- Max 50 nodes in a ring
- Max 200ms reconfiguration time
The following switches support MRP:
- X200 as of v4.0
- X200 IRT as of v4.0
- X300 as of v3.0
- X400 as of v3.0
https://cache.industry.siemens.com/dl/files/127/19292127/att_69558/v1/profinet_system_description_en-US_en-US.pdf
Check architecture which best serve your application from the following
SIMATIC PCS 7 Standard Architectures ( V9.0 / V8.2 / V8.1 / V8.0 / V7.1 / V7.0 )
https://support.industry.siemens.com/cs/document/32201963/simatic-pcs-7-standard-architectures- (-v9-0-v8-2-v8-1-v8-0-v7-1-v7-0-)
SIMATIC PCS 7 Standard Architectures (V8.2)
https://support.industry.siemens.com/cs/attachments/109739629/109739629_PCS_7_Architectures_V82_en.pdf
SIMATIC PCS 7 Standard Architectures (V9.0)
https://support.industry.siemens.com/cs/attachments/109751791/109751791_PCS_7_Architectures_V90_en.pdf

PROFINET is supported as a fieldbus with PCS 7 V8.0 Upd1 and above. From PCS 7 V8.0 SP1 onward,
Which controllers can be used to set up a PROFINET field bus in PCS 7?
https://support.industry.siemens.com/cs/document/82948099/which-controllers-can-be-used-to-set-up-a-profinet-field-bus-in-pcs-7

https://support.industry.siemens.com/cs/document/109747976/function-overview-of-profinet-devices-in-simatic-pcs-7
https://support.industry.siemens.com/cs/attachments/109747976/109747976_PCS7_PROFINET_Devices_Overview_V1_3_en.pdf