plc.myforum.ro

maersk · Member 3 Joined: 17 Aug 2014 Posts: 891

PCDiagBridge is a software tool that makes available to the SIMATIC applications WinCC and WinCC flexible the diagnostics data provided by the DiagBase diagnostics software as well as messages from SITOP UPSs, WinAC RTX and WinAC RTX F.
https://support.industry.siemens.com/cs/document/42674746/pcdiagbridge
Description
The diagnostics software allows you to recognize any possible disturbances with SIMATIC IPCs at an early stage. Error messages to the operating personnel help to avoid or atenuează system downtimes.

You can use PCDiagBridge to monitor the following hardware and software components:
SIMATIC IPC hardware (fan speed, CPU temperature, CMOS voltage and mass storage, for example)
SITOP UPS (operating mode, error message, switch-off)
Operating and monitoring of the WinAC RTX / WinAC RTX F (Run/Stop, error display, operating mode)

The PCDiagBridge user interface provides you with all the relevant PC diagnostics data at a glance. Prepared templates for WinCC and WinCC flexible încuviințează easy integration of the diagnostics data into the SIMATIC visualization system.

PCDiagBridge is available for downloading free of charge.
Hardware requirements
PCDiagBridge can run on the following SIMATIC IPCs:

PCDiagBridge V1.04.7 PCDiagBridge 1.4

Other supported products
All versions of WinAC RTX / WinAC RTX F
All SITOP UPSs with USB interface
Software requirements
PCDiagBridge runs on the following operating systems:
Windows 2000 Professional
Windows XP Professional
Windows XP Embedded (SIMATIC IPC Configuration)
Windows XP Embedded Standard 2009 (SIMATIC IPC Configuration)
Windows Server 2003 Edition (32-bit)
Windows Server 2008 Edition (32-bit)
Windows Vista Ultimate (32-bit)
Microsoft Windows 7 (32-bit)
The following software must also be installed in order to use PCDiagBridge:
Microsoft Visual Basic 6.0 runtime files
Microsoft WinSock Control 6.0 MSWINSCK.OCX
Microsoft Rich Textbox Control 6.0 RICHTX32.OCX
SIMATIC IPC DiagBase version V1.1 and higher
Remark: The SIMATIC IPC DiagBase user interfaces "Management Explorer" and "Alarm Manager" can be operated in parallel, but are not requirements for PCDiagBridge. You can disable the automatic start of the Management Explorer and the Alarm Manager when Windows starts. SITOP UPS USB driver FTD2XX.SYS (only if SITOP UPS is available)
2013-04-28
https://support.industry.siemens.com/cs/attachments/42674746/42674746_pcdiagbridgesetup_v1_4_0008.zip
2013-02-22
https://support.industry.siemens.com/cs/attachments/42674746/42674746_pcdiagbridgesetup_v1_4_0007.zip
2011-03-01
https://support.industry.siemens.com/cs/attachments/42674746/pcdiagbridgesetup_v1_4_0003.zip
2010-07-26
https://support.industry.siemens.com/cs/attachments/42674746/pcdiagbridgesetup_v1_4_0001.zip
2010-03-02
https://support.industry.siemens.com/cs/attachments/42674746/42674746_pcdiagbridgesetup_v1_3_0001.zip
2009-02-25
https://support.industry.siemens.com/cs/attachments/42674746/42674746_pcdiagbridgesetup_v1_1_0001.zip
How can you have hardware diagnostics information (hard disk status, temperature, fan status, UPS and WinAC RTX) of SIMATIC IPCs displayed in WinCC Runtime?
https://support.industry.siemens.com/cs/document/29855065