plc.myforum.ro

rott · Senior Joined: 23 Aug 2011 Posts: 2266

PACTware 4.X is necessary for adapters used for transducers' parametrization with HART protocol.
Home: http://www.pactware.com/en/home.html
Interface
Connection adapter with RS 232 interface K-ADP1 or USB interface K-ADP-USB (for K-System)
adapter for gateways with RS 232 intrface K-ADP2 (for RPI-System)
adapter for gateways with RS 485 interface K-ADP4 (for RPI-System)
USB/RS 485 interface converter (for LB-System)

Software
Hardware requirements PACTware requires 50 MBytes hard drive memory and a minimum of 40 MBytes main memory. Depending on the complexity of the projects and the DTMs used, the main memory requirement can be greater. A computer with a Pentium IV 450 MHz processor or better is recommended, XGA graphics, and a Microsoft-compatible mouse or equivalent pointing device arealso required.
Software requirements PACTware runs in operating systems Windows XP/Vista/7. The software .NET Framework 2.0 must be installed. For printing and online help, MS Internet-Explorer 4.0 or higher is required
Languages German, English, French, Spanish, Russian can be selected
Licensing PACTware does not require licensing. Please take the license conditions of the DTMs out of the data sheets of the corresponding DTMs.
Installation Under Windows XP/Vista/W7 administrator rights are required.
Configuration
Representation of the system configuration Graphic representation of all communication and device DTMs in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Numeroase windows can be open simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously.
System planning, application processing Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk or disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels.
Associated products CD-ROM with PACTware and complete DTM-Collection of all available DTMs of the Pepperl+Fuchs H-, K-, and E-System devices, HART Multiplexers, Remote I/O-Systems, FieldConnex devices, WirelessHART devices and level devices.
Download:
http://files.pepperl-fuchs.com/selector_files/navi/productInfo/18/1831481c.zip
http://www.ohmartvega.com/downloads/Software/PACTware4_0.exe
Tutorial: http://www.youtube.com/watch?v=6CVl0fGbPgE
USB to HART adapters using this software:
https://procomsol.com/
http://www.microflx.com/Microlink_USB.htm

Carlos · Member Joined: 07 Jan 2012 Posts: 138

do you have any version with the save function activates
send me please
thanks
most_trengo@europe.com

rott · Senior Joined: 23 Aug 2011 Posts: 2266

http://www.microflx.com/PACTware_Quick_Start_Guide.pdf
http://www.microflx.com/PACTware4+DTMs.zip
http://www.microflx.com/HART_FDT.zip
http://www.pactware.com/en/downloads/pactware.html

Carlos · Member Joined: 07 Jan 2012 Posts: 138

i have this, just go at the website :-(

anyway thanks
most

arturo neira · Member junior Joined: 30 Sep 2012 Posts: 55

rott · Senior Joined: 23 Aug 2011 Posts: 2266