plc.myforum.ro

maersk · Member 3 Joined: 17 Aug 2014 Posts: 891

Migration Tool for TIA Portal

To carry out a migration without the initial software, the following preparatory steps are necessary:
Install the migration tool referenced for download below on the PG/PC with the source project.
Start the migration tool and use it to convert the source project into the migration file format with the file ending ".amxx".
Please ensure that the complete software necessary for processing the source project is installed on the PG/PC. This includes all necessary Service Packs, Hardware-Support Packages and the complete expansion software required for processing the initial project. If the individual products are not installed, the migration can either not be executed at all, or only in parts.
Copy the migration file to the target system with the current installation of the TIA Portal.
Please note that the target hardware must have all the software installed that is necessary for configuration of all the devices contained in the migration file.
Execute the migration within the TIA Portal and specify the migration file as source.
Check the log file after the migration and systematically work through the remarks referenced in the newly created project. After the first compilation of the configuration take special note of the remarks in the inspector window.

Supported software products
The migration tool supports the migration of the following projects:
STEP 7 Professional 2010
STEP 7 V5.5
WinCC V7.0
WinCC flexible 2008 SP2 / SP3
Distributed Safety V5.4
simatic_migration_tool_tia_v13_sp1
https://cache.industry.siemens.com/dl/files/200/58638200/att_830610/v1/simatic_migration_tool_tia_v13_sp1.exe?download=true
https://support.industry.siemens.com/dl/files/200/58638200/att_852933/v1/Safety_PlugIn_Migration_Tool_TIA_V13_SP1.exe?download=true&retCode=ok

maersk · Member 3 Joined: 17 Aug 2014 Posts: 891

Migration Tool TIA Portal
https://support.industry.siemens.com/cs/document/58638200/
The Migration Tool supports the migration of the following projects (as of version):
STEP 7 Professional 2010
STEP 7 V5.5
WinCC V7.2
WinCC flexible 2008 SP2 / SP3
Distributed Safety V5.4

The Migration Tool is located on every STEP7 Prof / WinCC Comfort / WinCC Adv. or WinCC Prof. DVD in the following folder:
Support/SIMATIC_Migration_Tool_TIA_Vxxxx.exe
Alternatively, you can download the Migration Tool directly:
Migration Tool V13 SP2:
https://support.industry.siemens.com/cs/attachments/58638200/SIMATIC_Migration_Tool_TIA_V13_SP2.exe
Migration Tool V14 SP1*
https://support.industry.siemens.com/cs/attachments/58638200/SIMATIC_Migration_Tool_TIA_V14_SP1_Upd2.exe
Download Safety Plug-in for the Migration Tool
[URL=https://userscloud.com/evyedifhq89n]Safety_PlugIn_Migration_Tool_TIA_V13_SP2.exe - 15.1 MB[/URL]
[URL=https://userscloud.com/3chjs83rt1as]Safety_PlugIn_Migration_Tool_TIA_V14_SP1.exe - 16.3 MB[/URL]