| View previous topic :: View next topic |
| Author |
Message |
thehumi
Member junior
Joined: 07 Aug 2019
Posts: 53
|
 Posted: 15/11/2019 16:55 Post subject: LogicMaster Series |
 |
|
LogicMaster 1 (For GE Series 1 PLC CPU101, CPU102, CPU103)
LogicMaster 1F (For GE Series 1 Enhanced CPU104 and Series 1 Plus CPU105, CPU106)
Logicmaster 1 Jr. (For GE Series 1 Junior Series)
TISoft
The Data Communication Module is required to use the software.
Cat# 1C610CCM100 works with Series 1 and Series 1 Jr PLCs only. (CPU101, CPU102, CPU103)
Cat# 1C610CCM105 works with Series 1 , Series 1 Jr and Series 1 Plus PLCs
Texas Instruments Cat# 305-02DM (I think only works for the Series 1, not the Series 1 Plus or Jr?)
There are clip-on programmer units also. A Data Communications Module is not required to use this.
Programmer Cat# IC61OPRG100 works with Series 1 PLCs Only (CPU101, CPU102, CPU103)
Programmer Cat# IC61OPRG105 works with Series 1 and Series 1 Plus PLCs
DirectSoft32 will program the CPU105 and CPU106.
Directsoft32 will not program the CPU101, CPU102, CPU103, or CPU104.
I do not know if the new versions of Directsoft will work.
The AutomationDirect DL-330 is a direct replacement for all three Series One Plus CPU models, CPU104, CPU105, CPU106
LogicMaster 3 (For GE Series 3 PLC)
Apparently this software was never released.
The CPU processor has a built in programmer. cat# IC630CPU301A
Use the Tape Recorder to backup and transfer the program to other CPU. All programs will have to be transcribed with pencil and paper from the built-in Programmer.
LogicMaster 5 (for GE Series 5 PLC)
Uses Serial Communication.
LogicMaster 6 (For GE Series 6 PLC)
IC641PBE672 - Logicmaster 6 Serial Interface Version
Additional PC hardware not required. Requires a CCM Module installed in Slot 5 of the PLC Rack and included in the existing PLC Program to function. PLC must be in STOP mode to save program out of PLC memory. Online program edits are not allowed. Overall communication speed is slow.
Serial Interface ISA Card
Cat# IC640WMI310 (Single Board ISA Interface Serial Card)
Logicmaster 6 Parallel Interface Version
Requires special parallel port ISA boards for your PC...
Cat# IC640BSS303 (Board 1, Transmitter Board) Has no ports in the back.
Cat# IC640BLD304 (Board 2, Terminator/Interface Board), has the parallel port, but does not take any power from the bus, but needs a slot to plug into for mounting. These two cards are connected with a 34-pin ribbon cable.
Or for an IMB PS/2 system
Cat# IC640WMI910B (Single MCA-ISA Board.)
Requires @5047.ADF file for configuration
Communications cable alone is Cat# IC600WD010 (For Series 6 only?) or IC647CBL703C (For Series 90-70 only?)
PLC memory can be saved to a PC when it is in RUN mode.
Online Program edits are allowed. And the Speed is much faster than the Serial version. it can make Online Monitoring better.
LogicMaster 90-30 (For GE 90/Micro, 90/20, and 90/30 PLC)
Latest Version is v9.05 comes on the VersaPro v2.04 SP1 CD
LogicMaster 90-70 (For GE 90/70 PLC)
Latest Version is v7.05 comes on the VersaPro v2.04 SP1 CD
Last edited by thehumi on 31/03/2021 14:13; edited 19 times in total |
|
| Back to top |
|
 |
jawakid
Junior
Joined: 06 Jan 2018
Posts: 7
|
| Posted: 15/11/2019 22:27 Post subject: |
|
|
| https://www.mediafire.com/file/oewjbtcoew6otxe/LogixMaster_90_30.rar/file |
|
| Back to top |
|
|
thehumi
Member junior
Joined: 07 Aug 2019
Posts: 53
|
| Posted: 27/07/2020 18:40 Post subject: |
|
|
Hello Friends,
I will try to update information here.
Last edited by thehumi on 18/02/2021 03:48; edited 1 time in total |
|
| Back to top |
|
|
Florian73
Junior
Joined: 14 Aug 2020
Posts: 1
|
| Posted: 19/08/2020 09:02 Post subject: |
|
|
| Thanks thehumi..... |
|
| Back to top |
|
|
Faseo Grande
Junior
Joined: 30 Oct 2018
Posts: 6
|
| Posted: 05/02/2021 19:53 Post subject: |
|
|
https://www.upload.ee/files/12844523/Logicmaster90.zip.html
https://fastshare.cz/15845754/logicmaster90.zip |
|
| Back to top |
|
|
Frost331
Junior
Joined: 07 Apr 2021
Posts: 18
|
| Posted: 23/03/2022 02:15 Post subject: |
|
|
| Faseo Grande wrote: | https://www.upload.ee/files/12844523/Logicmaster90.zip.html
https://fastshare.cz/15845754/logicmaster90.zip |
Hello can you please reupload? Thanks!! |
|
| Back to top |
|
|
Faseo Grande
Junior
Joined: 30 Oct 2018
Posts: 6
|
| Posted: 23/03/2022 19:45 Post subject: |
|
|
https://ulozto.net/file/xeSkQdjFmZU2/logic-master-90-30-v9-05-rar
[URL=https://veryfiles.com/7j6lpxbjp2lt]Logic_Master_90_30_V9.05.rar - 8.0 MB[/URL]
[url=http://www.girlshare.ro/3770179086.3]Logic_Master_90_30_V9.05.rar[/url] |
|
| Back to top |
|
|
douyi
Junior
Joined: 25 Mar 2013
Posts: 9
|
| Posted: 01/02/2023 03:24 Post subject: Logic Master 5 |
|
|
Does anyone have this?
It's very old software running on DOS.
Thanks! |
|
| Back to top |
|
|
CR
Junior
Joined: 10 May 2023
Posts: 5
|
| Posted: 10/05/2023 12:00 Post subject: Serial number for Logicmaster 90-30 v9.05 |
|
|
Hi,
would anyone have the serial number Logicmaster 90-30 v9.05, please? |
|
| Back to top |
|
|
thehumi
Member junior
Joined: 07 Aug 2019
Posts: 53
|
| Posted: 10/05/2023 16:47 Post subject: |
|
|
| The install should not be asking you for a serial number. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
