| View previous topic :: View next topic |
| Author |
Message |
kakelusachris
Junior
Joined: 14 Jun 2022
Posts: 3
|
 Posted: 14/06/2022 14:40 Post subject: Intouch 9.5 MBTCP I/O driver |
 |
|
I have Intouch 9.5 system communicating to ScadaPAck 32 via MBTCP, the setup is Intouch- OPC Link- Scada Server (Scadapack OPC)-ScadaPAck PLC.
ScadaServer isn't available anymore (They gave you the license over the phone and it is PC based) and I need to migrate the system to a new PC, does anyone have a similar setup and knows what other OPC to use or have the I/O driver for MBTCP.
I tried Matrikon OPC but I couldn't make it work, the OPC would read the PLC registers but I couldn't get Intouch/OPC link to read Matrikon OPC. |
|
| Back to top |
|
 |
stoprun1
Junior
Joined: 11 Jan 2018
Posts: 2
|
| Posted: 14/06/2022 16:39 Post subject: Re: Intouch 9.5 MBTCP I/O driver |
|
|
| kakelusachris wrote: | I have Intouch 9.5 system communicating to ScadaPAck 32 via MBTCP, the setup is Intouch- OPC Link- Scada Server (Scadapack OPC)-ScadaPAck PLC.
ScadaServer isn't available anymore (They gave you the license over the phone and it is PC based) and I need to migrate the system to a new PC, does anyone have a similar setup and knows what other OPC to use or have the I/O driver for MBTCP.
I tried Matrikon OPC but I couldn't make it work, the OPC would read the PLC registers but I couldn't get Intouch/OPC link to read Matrikon OPC. |
https://www.se.com/ww/en/product-range/61247-scadapack-300-32/#software-and-firmware |
|
| Back to top |
|
|
509hsgxt
Junior
Joined: 14 Jun 2022
Posts: 2
|
| Posted: 14/06/2022 17:13 Post subject: Re: Intouch 9.5 MBTCP I/O driver |
|
|
| kakelusachris wrote: | I have Intouch 9.5 system communicating to ScadaPAck 32 via MBTCP, the setup is Intouch- OPC Link- Scada Server (Scadapack OPC)-ScadaPAck PLC.
ScadaServer isn't available anymore (They gave you the license over the phone and it is PC based) and I need to migrate the system to a new PC, does anyone have a similar setup and knows what other OPC to use or have the I/O driver for MBTCP.
I tried Matrikon OPC but I couldn't make it work, the OPC would read the PLC registers but I couldn't get Intouch/OPC link to read Matrikon OPC. |
check this
https://www.faweb.net/en/product/opc/scada/opclink
http://www.ioserver.com/intouch.html |
|
| Back to top |
|
|
kakelusachris
Junior
Joined: 14 Jun 2022
Posts: 3
|
| Posted: 14/06/2022 19:54 Post subject: |
|
|
| Thanks for the info, I am trying to get a hold of Archestra software and give it a try, hopefully I have better luck than with Matrikon. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
