plc.myforum.ro :: How to config SCADAPACK E334 WITH router

plc.myforum.ro
PLCs users www.plc.myforum.ro!

FAQ

Memberlist

Usergroups

Profile

How to config SCADAPACK E334 WITH router

plc.myforum.ro Forum Index -> Schneider Electric

View previous topic :: View next topic

Author

Message

huynhtrong
Junior 2

Joined: 23 Apr 2017
Posts: 21
Location: vietnam

Posted: 14/06/2017 15:17 Post subject: How to config SCADAPACK E334 WITH router

Hi all, I'm facing a problem when i connect a router between a scadapack.Itry to open port forward to read data from difference place. Can you give me the direction to shove this problem ? thanks for reading. _________________ aaaa

absaud
Member 2

Joined: 19 Apr 2014
Posts: 313

Posted: 14/06/2017 16:28 Post subject: Re: How to config SCADAPACK E334 WITH router

huynhtrong wrote:

Hi all,
I'm facing a problem when i connect a router between a scadapack.Itry to open port forward to read data from difference place.
Can you give me the direction to shove this problem ?
thanks for reading.

Your data are not enough to solve your problem.
These sample programs are intended to demonstrate one or more programming functions or methods and are presented as programming examples only. Schneider Electric assumes no liability for the use or application of these example programs or any portion thereof.
ClearSCADA
SCADAPack Workbench
IEC61131-3
Telepace Studio
Realflo

SCADAPack Workbench
SCADAPack Workbench is the IEC61131-3 programming environment for SCADAPack E smart RTUs.

Code:

Simple Pump Control / Workbench Overview
This sample demonstrates a simple pump control application created in SCADAPack Workbench over an IP link to a SCADAPack 334E RTU. Any 300E range of RTU may be used with this Workbench sample. The E Configurator must be used to first write a default configuration to your RTU. This example includes a 334E configuration and a video demonstrating the Workbench environment. This is an excellent starting point for any new user of SCADAPack Workbench.
Poll a Serial Modbus device -
How to read and write data to a DNP3 peer device.
DNP3 Peer to Peer Communication -
How to poll a serial Modbus device from a SCADAPack 313E or 334E RTU. Analog and binary input and output data are exchanged between the RTU point database and the Modbus device.
Write a Custom Serial Protocol -
An example of how to write a custom serial protocol using a SCADAPack E RTU.
IEC61131-3
IEC61131-3 is the ISaGRAF 3 programming environment for SCADAPack smart RTUs.
SCADAPack and SCADAPack E
Simple Motor Control -
Example of simple motor control using the FBD Language.
IO Configuration Libraries -
IO Configuration Libraries for each SCADAPack RTU and Gas Flow Computer.
Getting Started Program Template -
Getting started template for creating new IEC61131-3 projects.

Data Logging
Datalog to Internal Memory -
How to use the Datalog function block to log data to SCADAPack internal memory.
Datalog to USB Memory -
How to log data to a USB mass storage device.

Communications
Send a Master Message in FBD -
How to transfer data between RTUs using the FBD Language.
Send a Master Message in LD -
How to transfer data between RTUs using the LD Language.
Send a Master Message in SFC -
How to transfer data between RTUs using the SFC Language.
Dialup modem control -
How to control a dial up modem using the SFC language.

Send and receive a text string -
How to use the string function blocks to send and receive ASCII text strings on a serial port.
Email Function Block - Custom function block that sends an email from a SCADAPack 350.
Monitor Modbus/TCP Traffic - Monitor the Ethernet Port for activity by measuring the time between incoming Modbus/TCP commands.

Telepace Studio
Telepace Studio is the ladder logic programming environment for SCADAPack smart RTUs.
Communications
Modbus RTU Master - Exchange data between master and slave SCADAPacks over a serial connection using the MSTR function.
Modbus/TCP Master - Exchange data between master and slave SCADAPacks over an IP network using the MSIP function.
Dial Out - Dial out from a master RTU to slave RTUs using dial-up modems and the DIAL function.
Initialize Modem for Auto-answer - How to setup a 5901 modem for auto-answer using the INIM function.
Modbus Routing with Address Translation - How to configure store and forward routing between SCADAPack RTUs using station address translation.
Modbus Routing with Port Translation - How to configure store and forward routing between SCADAPack RTUs using communication port translation.
Poll a HART Transmitter - How to poll a HART transmitter using the 5904 HART interface module and HART function.
DF1 Communication - Exchange data between two SCADAPacks using the DF1 protocol and the MSTR function.
DF1 Communication over dialup - Exchange data between two SCADAPacks using the DF1 protocol over a dialup modem and the MSTR and DIAL functions.
Poll ABB Totalflow - Poll data from an ABB Totalflow 7100 LevelMaster.

Data Conversion
Scale Analog Inputs - Scale 16-bit analog inputs into floating point values using the SCAL function.
Input Damping - How to limit the rate of change of a value.
Convert BCD to Integer - Convert 16-bit Binary-Coded-Decimals into 16-bit integer values.
Convert Integer to BCD - Convert 16-bit integer values into 16-bit Binary-Coded-Decimals.
Daylight Savings Time Adjustment - Convert SCADAPack real time clock for daylight savings time adjustment.

Miscellaneous
Flow volume accumulation - Calculate Flow Rates and Accumulated Flow Using Pulse Input using the FLOW function.
PIDA Control - How to use the PIDA function in manual mode and P, PI, and PID control modes.
Simple Motor Control - Example of simple motor control (or latch / unlatch control).
Logic Scan Time - How to measure the scan time (or loop time) for one execution of your Ladder Logic program.

[URL=https://userscloud.com/o05fz6ipygu0]datalog_v01.zip - 14 KB[/URL]
[URL=https://userscloud.com/ck41v4fdw5i4]dlogf_USB_v01.zip - 22 KB[/URL]
[URL=https://userscloud.com/cjldvq34n489]Email_FB_v01.zip - 888 KB[/URL]
[URL=https://userscloud.com/rad6y7oofuu8]master_FBD_v01.zip - 16 KB[/URL]
[URL=https://userscloud.com/0qwovxcrt5os]master_LD_v01.zip - 17 KB[/URL]
[URL=https://userscloud.com/7oj04i8yuc5j]master_SFC_v01.zip - 14 KB[/URL]
[URL=https://userscloud.com/xq5zp3y9hu4t]motor_v01.zip - 12 KB[/URL]
[URL=https://userscloud.com/7apd7c47epjy]mtcp_monitor_v01.zip - 15 KB[/URL]
[URL=https://userscloud.com/ora9sw4ibmtv]project_template_v01.zip - 8 KB[/URL]
[URL=https://userscloud.com/anyf9a277m5c]scaling_avg_v01.zip - 25 KB[/URL]
[URL=https://userscloud.com/lhdukk6p9w9q]scaling_v01.zip - 15 KB[/URL]
[URL=https://userscloud.com/lewzrl6btwus]stringFBs_v01.zip - 18 KB[/URL]
[URL=https://userscloud.com/pmf47mahbm31]TRSS - DNP3 Peer Comms v01.zip - 1.4 MB[/URL]
[URL=https://userscloud.com/d2jmx0xqlb0u]TRSS - Example of a custom Serial Protocol v02.zip - 411 KB[/URL]
[URL=https://userscloud.com/961tfv6ac3b1]TRSS - Poll Modbus RTU device v02.zip - 71 KB[/URL]
[URL=https://userscloud.com/xaud705uupmw]TRSS - SCADAPack Workbench Demo v02.zip - 135.5 MB[/URL]
[URL=https://userscloud.com/ktb7p0pmjvy5]TRSS CS Trio Diagnostics template v02.zip - 361 KB[/URL]

huynhtrong
Junior 2

Joined: 23 Apr 2017
Posts: 21
Location: vietnam

Posted: 15/06/2017 03:32 Post subject: Thanks for support.

I use software scadapack E configurator to config scadapack E334 and clearscada to read data from scadapack in defference place. I put router in ethernet port in scadapack E ,but i don't know to config gateway in scadapack E. How to config port and port forward in scadapack E ? Thanks for help. _________________ aaaa

absaud
Member 2

Joined: 19 Apr 2014
Posts: 313

Posted: 15/06/2017 08:25 Post subject: Re: Thanks for support.

huynhtrong wrote:

I use software scadapack E configurator to config scadapack E334 and clearscada to read data from scadapack in defference place.
I put router in ethernet port in scadapack E ,but i don't know to config gateway in scadapack E.
How to config port and port forward in scadapack E ?
Thanks for help.

PLease check
https://www.plcsystems.ru/catalog/SCADAPack/doc/TCPIP_Technical_Reference.pdf
https://www.plcsystems.ru/catalog/SCADAPack/doc/SCADAPackES_Quick_Start_Guide.pdf

Configure SCADAPack 32 & 350 to communicate via Ethernet
http://resourcecenter.controlmicrosystems.com/pages/releaseview.action?pageId=4588022
How do I configure a SP32-SP3xx controller to communicate on the LAN Port using TelePACE?
http://resourcecenter.controlmicrosystems.com/pages/releaseview.action?pageId=13213619
http://resourcecenter.controlmicrosystems.com/download/attachments/14123739/CMI_UltraJR50_QuickStartGuide.pdf?version=1&modificationDate=1239722199517

http://resourcecenter.controlmicrosystems.com/dosearchsite.action?queryString=configuration+gateway+&where=conf_all&startIndex=0

Display posts from previous:

	plc.myforum.ro Forum Index -> Schneider Electric	All times are GMT + 2 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum