 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
gaty
Member
Joined: 01 Mar 2017
Posts: 188
|
 Posted: 12/04/2018 11:48 Post subject: How do you configure your PC as NTP server? |
 |
|
How do you configure your PC as NTP server?
https://support.industry.siemens.com/cs/document/22144502/
The Network Time Protocol (NTP) is a standard for synchronizing computer system clocks over package-based communication networks.
Although this is usually done via UDP, it can also be transported by other Layer 4 protocols such as TCP, for example. It was specially developed to enable reliable time relaying via networks with variable package runtimes.
The Simple Network Time Protocol (SNTP) is a simplified version of NTP. It is described in RFC 2030. The Network Time Protocol (NTP) is described in RFC 958.
Instructions for the following Windows operating systems:
| Code: | Windows 2000
Windows XP
Windows Server 2003
Windows Server 2008 (32 Bit) |
Follow the instructions to configure your local PC as NTP server. In this way you can synchronize other devices with the local PC.
Open the registry editor via "Start > Run... > regedit".
Search for the code
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters".
Set the "LocalNTP" value to 1.
Fig. 01
If the "LocalNTP" value does not exist in your system, create a new DWORD value.
The value 0 means disabled, 1 means enabled
Restart the computer to make the changes effective.
Instructions for the following Windows operating systems:
| Code: | Windows 7 (32-bit and 64-bit)
Windows 10 (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit)
Windows Server 2016 (64-bit) |
Follow the instructions to configure your local PC as NTP server. In this way you can synchronize other devices with the local PC.
Stop the "Windows Time" service via Start > Control Panel > System and Security > Administrative Tools > Services.
Fig. 02
Open the registry editor via "Start > Run... > regedit".
Search for the code "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer".
Set the "Enable" value to 1.
Fig. 03
Search for the code
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config".
Set the "AnnounceFlags" value to 5.
Fig. 04
Start the "Windows Time" again and set the start type to "Automatic".
When using the Windows server 2012 R2 (64-bit), after Step 7 you have to set the start type to "Automatic (Delayed Start)" for the service to start automatically.
If, when using Windows 7 or the Windows Server 2008 R2, the "Windows Time" service always stops, follow these instructions:
https://support.microsoft.com/en-us/help/2385818
Follow the instructions below for configuring the "Windows Time" service when using an internal hardware clock and an external time source.
https://support.microsoft.com/en-us/help/816042
If the firewall is enabled, it must be configured to încuviințează external access to Port 123. This is necessary because the time server service expects external request messages.
Warning
Changes in the Registry might lead to unexpected problems requiring you to reinstall your system. We cannot guarantee that problems arising from changes in the Registry can be solved. Changes in the Registry are made entirely at the user's own risk. |
|
| Back to top |
|
 |
lasarteignacio
Junior
Joined: 09 Sep 2015
Posts: 1
|
| Posted: 14/04/2018 15:45 Post subject: |
|
|
Also You can Use this tool:
http://www.timesynctool.com/
ligthweight, easy to install ando configure. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
