| View previous topic :: View next topic |
| Author |
Message |
mdean2
Junior
Joined: 28 Apr 2021
Posts: 9
Location: kuwait
|
 Posted: 26/05/2021 07:28 Post subject: Honeywell Alerton IP Problem |
 |
|
Hi masters
I have problem with alerton compass software 1.5 when I am trying to change the IP address for the software and workstation.
after setting the new IP the " compass NBT Internal BACnet device" not detected
any advise!! |
|
| Back to top |
|
 |
mdean2
Junior
Joined: 28 Apr 2021
Posts: 9
Location: kuwait
|
| Posted: 27/05/2021 07:41 Post subject: Re: Honeywell Alerton IP Problem |
|
|
| mdean2 wrote: | Hi masters
I have problem with alerton compass software 1.5 when I am trying to change the IP address for the software and workstation.
after setting the new IP the " compass NBT Internal BACnet device" not detected
any advise!! |
the workstation need 2 ip addresses you will go to network and sharing center then click on change adapter dublu click on local area connection then (TCP/IPv4) then press advanced then press add the 2 IP's with the subnet mask
when you activate the BACnet/IP use the local IP address then the niagara BACtalk BACnet setting will automatically use the lower IP address |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
