plc.myforum.ro

szimano · Junior Joined: 28 Jul 2022 Posts: 3

I have an HMI panel installed in one location. GTO Schneider. I am thinking of updating the software in it. But looking at the files provided by the system builder. I don't have a VDZ file which is the standard for vijeo. But I have folders and files that point to files I think from the CIMPLICITY application?. If so, how to import it to the controller, if it turns out that there is no project on the controller.

An additional problem that I would like to raise with HMI panels. It is the saving of logs and operating status for possible verification during system errors. How to do it.

Antterra · Junior Joined: 27 Sep 2022 Posts: 4

HMIGTO updating the software
Cannot download to new or replacement HMIGTO. "Incompatible version of Runtime" error appears
Issue:
Unable to download to a HMIGTO HMI. Error is "Incompatible version of Runtime".
Product Line:
HMI, Magelis
Cause:
You may have a HMI unit that is no longer supported by your version of Vijeo Designer. This occurred when Schneider Electric increased the DRAM memory of the HMIGTO to support Vijeo XD. The chips were upgraded to 256 MB (128 MB usable for Vijeo Designer).
Resolution:
Check the date of manufacturing sticker on the HMI unit. If it starts with 16 or greater, then this is the newer design with increased memory.
Check your version of Vijeo Designer. It needs to be version V6.2 SP4.1 or higher.
If you have an older version of Vijeo Designer you must update it.
Schneider Electric's software download center can be accessed at https://www.se.com/us/en/download/
https://www.se.com/ww/en/faqs/FA297821/

Antterra · Junior Joined: 27 Sep 2022 Posts: 4

How do I setup an HMIGTO to upload the program if needed for later retrieval?
https://www.se.com/in/en/faqs/FA255296/
How do I setup an HMIGTO to upload the program if needed for later retrieval?
Issue
How do I setup an HMIGTO to upload the program (.VDZ file) if needed to be later retrieved?
Product Line
Vijeo Designer
Environment
HMI Configuration Software
Resolution
1) Set the Data Location, "Data Files / Forms" to the desired storage location of the HMI:
Main Drive - uses the embedded memory
Secondary Drive is the SD Card or
Optional Drive - is the USB memory stick
2) Expand Download under the target properties.
3) Set the "Include Editor Project" checkbox to ticked.
4) Download the Vijeo Designer application to the HMI.