| View previous topic :: View next topic |
| Author |
Message |
kullboys
Junior
Joined: 14 Dec 2018
Posts: 1
|
 Posted: 14/12/2018 06:09 Post subject: Help! Problem in cp443-1 and ET200PRO |
 |
|
In my multi project project S7-400H redundancy pcs7 v8.0
The ups Disconnect for several times
Later we found out one CP443-1 is stop and now not run And BUSF ,INTF is light(we download to the CPUs but no solve) we ping the ip address is ok
And 2 module analuge(module 1 and module 14) of ET200PRO is fault and out of service
We replace this module but still out of service
Thanks[url=http://esp.rc-hr.com/ActivityFeed/MyProfile/tabid/659/UserId/7006/Default.aspx].[/url] |
|
| Back to top |
|
 |
cajaet
Junior
Joined: 29 Oct 2018
Posts: 2
|
| Posted: 14/12/2018 13:09 Post subject: |
|
|
In the "Diagnostics" tab in the Inspector window Step7, you will see the following information:
– Entries in the diagnostics buffer of the CPU
– Information on the online status
In the "Online > Online and diagnostics" menu, you obtain the static information about the
module:
– General information on the module
– Diagnostics status
– Information on the interfaces
– Information relating to deosebit diagnostics (folder "Functions" > Singular diagnostics)
You will find further information on the diagnostics functions of STEP 7 in the STEP 7
information system.
what code has cp and cpu? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
