plc.myforum.ro

haiwellplc · Junior Joined: 05 Jul 2016 Posts: 8

Haiwell PLC’s recipe control function:

The recipe management control is often needed in the production process. The so-called recipe control is using different control parameters according to the different types or batches of the products. Forexample,assume that in the production of product A -- we use XA/YA/ZA to represent the parameter 1/2/3 respectively;ProductB - parameter 1/2/3 corresponds to XB/YB/ZB respectively;ProductC - parameter 1/2/3 corresponds to XC/YC/ZC respectively. Therefore, we can say that in this production there are three sets of recipes and each set consists of three parameters.

Usually,the recipe function can be realized by the upper computer. But in the absence of the computer, it can only be realized through PLC program.Below are the brief introduction of two ways to realize the recipe control function.

Method one: Block moving method;
Method two: Indexed pointer method.

Assume that we need 5 sets of recipes, each recipe has four parameters,.Firstly set up five "initial register values table", put one set of recipe with the corresponding 4 parameters in each table.The diagrams below:

Recipe Control Function: program of block moving method

Recipe Control Function: program of indexed pointer method

Xiamen Haiwell Technology Co., Ltd.

Add: 7th F, Torch Hi-tech Building, No.3699 Xiangan North Road, Xiamen, China
Tel：+86-0592-2230312
Fax：+86-0592-2230313
Web: www.haiwell.com