| View previous topic :: View next topic |
| Author |
Message |
dantedeineil
Junior
Joined: 08 Aug 2016
Posts: 19
Location: mexico
|
 Posted: 26/08/2016 17:21 Post subject: factorytalk view and servos |
 |
|
HI
I'm working with a servomotor and this has to give the correct distance to a tape to be cut but in the sequence of HMI where I ask that the bit that tells me that the distance is correct progresses even that bit is ever active and I have in mascarado bit to do this. I asked to confirm several more bits apart from the distance and still not receive any of those bits continuous sequence and this makes this step alone |
|
| Back to top |
|
 |
sommer
Junior
Joined: 31 Jul 2016
Posts: 2
|
| Posted: 26/08/2016 19:59 Post subject: Re: factorytalk view and servos |
|
|
| dantedeineil wrote: | HI
I'm working with a servomotor and this has to give the correct distance to a tape to be cut but in the sequence of HMI where I ask that the bit that tells me that the distance is correct progresses even that bit is ever active and I have in mascarado bit to do this. I asked to confirm several more bits apart from the distance and still not receive any of those bits continuous sequence and this makes this step alone |
I supposed you have a PLC with what type of connection...and so on.
How do you get an answer as long as you do not tell anything. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
