plc.myforum.ro

gert · Member 3 Joined: 02 Jan 2015 Posts: 645

Encoder Interfaces TM Count and TM PosInput in SIMOTION
https://support.industry.siemens.com/cs/document/109750430/
The TM Count 1x24V and TM PosInput 1 technology modules can be used, with restrictions, for count value and position acquisition for SIMOTION Technology objects. Die Technologiemodule TM Count 1x24V und TM PosInput 1 können, mit Einschränkungen, zur Drehzahl- und Positionserfassung für SIMOTION Technologieobjekte eingesetzt werden.

The TM Count 1x24V and TM PosInput 1 technology modules are used for count value and position acquisition of
Incremental encoders
Pulse encoders and
SSI absolute encoders
This application example describes the interface connection of encoder signals to SIMOTION technology objects using the technology modules TM Count 1x24V and TM PosInput 1.
Important note
Only technology objects with a limited motion path are supported.
Overflows and underflows of count value/position value have to be prevented by the user!
If counter underflow and overflow take place, actual value jumps take place on the technology object that may lead to undefined states on the machine.
Further information on the restrictions you can found in chapter 1.2.2. of the documentation.

Encoder Interfaces TM Count and TM PosInput in SIMOTION Encoder Interfaces TM Count and TM PosInput in SIMOTION

Encoder Interfaces TM Count and TM PosInput in SIMOTION Encoder Interfaces TM Count and TM PosInput in SIMOTION

Documentation und example project
https://support.industry.siemens.com/cs/attachments/109750430/109750430_LTmCount_DOC_v10_en.pdf
https://support.industry.siemens.com/cs/attachments/109750430/109750430_LTmCount_LIB_v10.zip
https://support.industry.siemens.com/cs/attachments/109750430/109750430_LTmCount_PROJ_v10.zip