 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
Khorne
Junior
Joined: 31 May 2018
Posts: 5
|
 Posted: 20/05/2019 04:24 Post subject: Duplicate HMI display to TV |
 |
|
Hello,
Please I'm using a Schneider Electric BMXP342020 PLC and HMIGTO6310
panel, I want to ask if there's a possible way to duplicate the display only to a TV or monitor, I don't want to control the panel, just a display duplicata of the real panel.
Thanks |
|
| Back to top |
|
 |
petercan
Junior
Joined: 03 Dec 2017
Posts: 3
|
| Posted: 20/05/2019 21:42 Post subject: |
|
|
| Maybe via Laptop..otherwise I do not think is possible.. |
|
| Back to top |
|
|
alwaan
Junior
Joined: 13 Oct 2013
Posts: 9
|
| Posted: 21/05/2019 23:39 Post subject: Re: Duplicate HMI display to TV |
|
|
| Khorne wrote: | Hello,
Please I'm using a Schneider Electric BMXP342020 PLC and HMIGTO6310
panel, I want to ask if there's a possible way to duplicate the display only to a TV or monitor, I don't want to control the panel, just a display duplicata of the real panel.
Thanks |
You could add an SDCard to the HMIGTO6310.
In Vijeo Designer activate the Web Server, then select a port and download the project to the HMIGTO6310 leaving the SDCard in the HMIGTO6310.
Install a dumb ethernet switch for interconnecting everything, choose your IP Addresses to avoid conflicts.
Use a low-cost Windows based thin client/media PC. Connect TV or monitor via it's HDMI port. Use Internet Explorer on the thin client to browse the Web server at the IP Address of the HMIGTO6310 and port you stipulated in Vijeo Designer. [For e.g. Http://192.168.10.50:777/]
The Web Page you first connect to, serves a one time ActiveX component (... that's why you need Internet Explorer) which needs Admin rights to install on your thin client.
The Web Server serves the HMI pages you designed as web pages and does not interfere with the HMIGTO6310 operation.
All the graphics duplicated without any hard work on your part!
Regards |
|
| Back to top |
|
|
Khorne
Junior
Joined: 31 May 2018
Posts: 5
|
| Posted: 24/05/2019 03:05 Post subject: Re: Duplicate HMI display to TV |
|
|
| alwaan wrote: | | Khorne wrote: | Hello,
Please I'm using a Schneider Electric BMXP342020 PLC and HMIGTO6310
panel, I want to ask if there's a possible way to duplicate the display only to a TV or monitor, I don't want to control the panel, just a display duplicata of the real panel.
Thanks |
You could add an SDCard to the HMIGTO6310.
In Vijeo Designer activate the Web Server, then select a port and download the project to the HMIGTO6310 leaving the SDCard in the HMIGTO6310.
Install a dumb ethernet switch for interconnecting everything, choose your IP Addresses to avoid conflicts.
Use a low-cost Windows based thin client/media PC. Connect TV or monitor via it's HDMI port. Use Internet Explorer on the thin client to browse the Web server at the IP Address of the HMIGTO6310 and port you stipulated in Vijeo Designer. [For e.g. Http://192.168.10.50:777/]
The Web Page you first connect to, serves a one time ActiveX component (... that's why you need Internet Explorer) which needs Admin rights to install on your thin client.
The Web Server serves the HMI pages you designed as web pages and does not interfere with the HMIGTO6310 operation.
All the graphics duplicated without any hard work on your part!
Regards |
Will try to do it, thanks a lot. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
