| View previous topic :: View next topic |
| Author |
Message |
rott
Senior
Joined: 23 Aug 2011
Posts: 2266
|
 Posted: 04/06/2012 22:04 Post subject: SIZER V3.7 for Siemens Drives |
 |
|
SIZER V3.7 for Siemens Drives
Links:
SIZER_V37.zip ( 872703 KB )
https://rapidshare.com/files/3350263969/SIZER_V37.001
https://rapidshare.com/files/2416252199/SIZER_V37.002
https://rapidshare.com/files/96358388/SIZER_V37.003
https://rapidshare.com/files/4120035342/SIZER_V37.004
https://rapidshare.com/files/674968438/SIZER_V37.005
https://rapidshare.com/files/2690937182/SIZER_V37.006
https://rapidshare.com/files/3230227805/SIZER_V37.007
https://rapidshare.com/files/2184794799/SIZER_V37.008
https://rapidshare.com/files/3477845322/SIZER_V37.009
SIZER_V37_CAD.zip ( 195981 KB )
https://rapidshare.com/files/2224801253/SIZER_V37_CAD.001
https://rapidshare.com/files/4057363065/SIZER_V37_CAD.002
https://rapidshare.com/files/969787388/SIZER_V37_CAD.003
Update:
https://rapidshare.com/files/2263312028/Update_V3_7_HF1.zip
Please see how to install considerations from above.... |
|
| Back to top |
|
 |
maersk
Member 3
Joined: 17 Aug 2014
Posts: 891
|
| Posted: 15/05/2015 20:03 Post subject: SIZER for Siemens Drives V3.13 HF1 (aktuellste Version) |
|
|
SIZER for Siemens Drives V3.13 HF1 (aktuellste Version)
CAD Creator is since version V3.6, not supplied by SIZER for Siemens Drives.
To use the CAD functionality of the CAD Creator (V1.7.1 or higher) must be installed on the PC.
SIZER for Siemens Drives V3.13 HF1
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_13_HF1.zip
optional Massblattgenerator
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_13_HF1_CAD.zip
https://support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-drives |
|
| Back to top |
|
|
maersk
Member 3
Joined: 17 Aug 2014
Posts: 891
|
| Posted: 20/05/2016 16:55 Post subject: SIZER for Siemens Drives V3.15 |
|
|
SIZER for Siemens Drives V3.15
https://support.industry.siemens.com/cs/attachments/54992004/ReadMe_OSS.htm
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_15.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_15_CAD.zip |
|
| Back to top |
|
|
fritz
Member
Joined: 26 Dec 2015
Posts: 179
|
| Posted: 27/04/2017 12:20 Post subject: SIZER for Siemens Drives V3.16 |
|
|
SIZER for Siemens Drives V3.16
https://support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-drives
Here, you will find the Version V3.16 of the SIZER engineering tool for drive systems (SINAMICS, MICROMASTER, DYNAVERT T und SIMATIC ET 200 FC), motor starters and controller systems (SINUMERIK, SIMOTION and SIMATIC Technology).
Third-party software - Licensing terms and copyright information
You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the Readme_OSS.pdf file.
Special information for resellers
The information and the license terms in the Readme_OSS.pdf file must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.
https://support.industry.siemens.com/cs/attachments/54992004/ReadMe_V3-16_OSS.htm
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_16.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_16_CAD.zip |
|
| Back to top |
|
|
fritz
Member
Joined: 26 Dec 2015
Posts: 179
|
| Posted: 28/11/2017 13:50 Post subject: SIZER for Siemens Drives V3.17 |
|
|
SIZER for Siemens Drives V3.17
https://support.industry.siemens.com/cs/document/54992004/
What is new in SIZER V3.17?
| Code: |
Motors, encoders and gearboxes
Inclusion of geared motors for suspended monorails (overhead conveyors)
SIMOGEAR portfolio extended to include single-stage worm geared motors
SIMOTICS XP 1MB1 included
Changes to the SIMOTICS GP/SD 1LE1 portfolio
SIMOTICS GP/SD 1LE1 motors can no longer be selected and dimensioned for operation with SINAMICS G110M
The M_stall/M_rated factor has been corrected for some 60 Hz versions
Default setting of the shipping connection (M01, M02) has been removed
Terminal box position "at the bottom" has been added (16th position of the article number = 7) for permitted shaft height
Update of the assignment of versions to aluminum and cast iron series
Update of the assignment for the enable signal on the line supply system / motor starter
Portfolio adjustments for SIMOTICS FD type of construction with/without protective cover
Portfolio adjustments for SIMOTICS GP/SD VSD10 line with addition of 2-pole versions
Extension of the display values in the SIMOGEAR motor dialog with the addition of rated gearbox torque and cantilever forces
Support for worldwide winding for SIMOGEAR
Configuration option for additional SIMOTICS S-1FG1 settings such as manual brake release and terminal boxes.
Portfolio corrections for SIMOTICS T-1FW6 normal cooling
Portfolio adjustments for SIMOTICS S-1PH8 for Pt1000
Data update for SIMOTICS M-1FE1
Various small data updates partially already included in the data update package for V3.16.
Drives / motor starters
Allow group drives for SINAMICS G120 and G120D
Circuit breakers for SINAMICS G120D have been updated
For SINAMICS S120 chassis SLM, the pre-charging limits have been adapted according to the Configuration Manual. In addition, the current values have been updated for the two SINAMICS Motor Modules 6SL3325-1TG41-6AP3 and 6SL3725-1TG41-6AP3.
Adjustment of the pulse frequency and temperature derating characteristic for the 7.5 kW Power Module for the SINAMICS G120D.
Input option for a pulse frequency derating for the SINAMICS G120 and G120D portfolio.
Update of the SINAMICS C/D type Motor Module with 24 A, 45 A and 60 A.
Update of the SINAMICS G120 portfolio with the addition of IOP-2 and IOP-2 handheld as well as fuses.
Update of the SINAMICS ET 200SP portfolio with the addition of motor starters up to 12 A.
Various small data updates partially already included in the data update package for V3.16.
Controls
Support of the CNC SW4.8 for SINUMERIK 840Dsl / 828D including new software options
Support for additional SINUMERIK operator components such as TOP panel, MCP 398C, SIMATIC IFP, IPC 427E
SINUMERIK 828D: Analog output configurable on PPU
SIMATIC S7-1500: Adjustment of the selection criteria (standard/T-CPU)
Additional functions
Input option for third-party products extended
For the SIMOGEAR portfolio, the new DT Configurator is called for further configuration
|
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_17.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_17_CAD.zip
https://support.industry.siemens.com/cs/attachments/54992004/LicenseSummary.htm_comb.zip
Data update package V3.1 for SIZER V3.17
New products that have been included
| Code: |
1FT7117, AH 100, High Dynamic
Note: SIMOTICS S-1FT7117-7..71-.L.0 - Z L06 servomotors are available in the following combinations:
with rated speeds of 2000 and 3000 rpm
with AM24DQI encoder (24 bit absolute encoder, multiturn with M17 signal connection)
DRIVE-CLiQ signal cables in conjunction with M17 signal connection are not supported in SIZER.
with brake, in shaft and flange accuracy tolerance N
with degree of protection IP64 (IP54 with fan) with vibration quantity level A
with option L06 (for increased shock load)
the outlet direction for the fan connector must be predefined for the forced-ventilation version (option Q4.)
For SIMOTICS GP/SD-1LG6 motors, versions "MA" and "MB" (9th and 10th position of the Article No.), the following encoders are approved and can be mounted:
H57 - rotary pulse encoder 1XP8001-1 (HTL)
H58 - rotary pulse encoder 1XP8001-2 (TTL)
H70 - rotary pulse encoder LL 861 900 220
H72 - rotary pulse encoder HOG 9 D 1024 I
H73 - rotary pulse encoder HOG 10 D 1024 I
SINAMICS G120, PM240-2, push through
The following article numbers are included again:
SIMOTICS GP-1LE1 (0; 5; 6) 03-1CC0.-....
SIMOTICS GP-1LE1 (0; 5; 6) 23-1CC0.-....
SIMOTICS GP-1LE1 (0; 5; 6) 43-1AA6.-....
Data updates
SIMOTICS S-1FK7 correction of the article number LP + gearbox: SIMOTICS S-1FK7022-5AK74-1HG3-Z V42
SIMOTICS S-1FT7, SH132, non-ventilated, characteristics have been corrected
SIMOTICS L-1FN3
The following linear motors have been added:
SIMOTICS L-1FN3600-4NA70
SIMOTICS L-1FN3600-2WB00
Characteristics and loss data have been revised
Changing over to Pt1000
MOTION CONNECT: Incorrect extension cable corrected
SINAMICS G120, PM250, standard power loss added
SINAMICS G120 cable lengths, circuit breakers and fuses updated
60 Hz data of IEC/NEMA (Eagle Line) motors has been corrected. The previously saved IEC 60 Hz data have been replaced by the NEMA 60 Hz data relevant for these motors.
For converter operation, SIMOTICS GP/SD-1LE1 motors are only approved/certified for voltages of up to 480 V. As a consequence, motors with voltages of 575 V up to 690 V are locked and cannot be selected.
At the present time, standard SIMOTICS GP/SD-1LE1 motors in the 500 V voltage level are permitted for converter operation; this means that SIMOGEAR 2KJ geared motors are still available for 500 V. However, the 500 V voltage level is not permitted for standard SIMOTICS GP/SD-1LE1 motors for converter operation. |
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_17_HF1.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_17_DB_V3_1.zip |
|
| Back to top |
|
|
fritz
Member
Joined: 26 Dec 2015
Posts: 179
|
| Posted: 03/06/2018 12:48 Post subject: SIZER for Siemens Drives V3.18 |
|
|
SIZER for Siemens Drives V3.18
https://support.industry.siemens.com/cs/document/54992004/
Download
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_18.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_18_CAD.zip
https://support.industry.siemens.com/cs/attachments/54992004/What_is_new_in_V3.18.pdf
https://support.industry.siemens.com/cs/attachments/54992004/Readme_OSS.zip |
|
| Back to top |
|
|
Allan Garcia
Junior
Joined: 10 Jul 2018
Posts: 19
|
| Posted: 30/06/2019 08:31 Post subject: SIZER for Siemens Drives V3.20 |
|
|
SIZER for Siemens Drives V3.20
https://support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-drives
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_20.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_20_CAD.zip
https://support.industry.siemens.com/cs/attachments/54992004/What_is_new_V_3_20.pdf
https://support.industry.siemens.com/cs/attachments/54992004/SizerforSiemensDrives__3.20__READMEOSS_2019-05-15__15-05-40.html
CAD CREATOR, dimension sheet and 2D/3D CAD generator
https://support.industry.siemens.com/cs/document/57218443/cad-creator-dimension-sheet-and-2d-3d-cad-generator
https://support.industry.siemens.com/cs/attachments/57218443/CADCreator_Read_OSS.pdf
https://support.industry.siemens.com/cs/attachments/57218443/0_CAD_CREATOR_22.zip |
|
| Back to top |
|
|
fritz
Member
Joined: 26 Dec 2015
Posts: 179
|
| Posted: 13/12/2019 15:54 Post subject: SIZER for Siemens Drives V3.21 |
|
|
SIZER for Siemens Drives V3.21
https://support.industry.siemens.com/cs/document/54992004/
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_21.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_21_CAD.zip
https://support.industry.siemens.com/cs/attachments/54992004/What_is_new_V3_21.pdf
https://support.industry.siemens.com/cs/attachments/54992004/SizerforSiemensDrives__3.21__READMEOSS_2019-10-21__16-10-39.html |
|
| Back to top |
|
|
fritz
Member
Joined: 26 Dec 2015
Posts: 179
|
| Posted: 20/01/2022 18:24 Post subject: SIZER V3.23 |
|
|
SIZER for Siemens Drives - Download for the current version V3.23 and all previous versions up to version V3.15
https://support.industry.siemens.com/cs/document/54992004/
The software is required for dimensioning of Siemens drive systems. The listing of the software versions is in historical order, starting with the latest version. Sizer with dimension sheet generator CAD Generator (for standard asynchronous motors) is no longer available.
Software
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_23.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_22.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_21.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_20.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_19.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_18.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_17_HF1.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_16.zip
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_15.zip
Data Updates
https://support.industry.siemens.com/cs/attachments/54992004/SIZER_V3_22_DB_V8_1.zip
Download
https://ulozto.net/file/qi18LM5CNWh5/sizer-v3-23-zip
[URL=https://www.file-upload.net/download-14825422/SIZER_V3_23.zip.html]SIZER_V3_23.zip[/URL]
https://anonfiles.com/Xcw70fCfx6/SIZER_V3_23_zip |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
