| View previous topic :: View next topic |
| Author |
Message |
panicho
Junior
Joined: 14 Jul 2016
Posts: 13
|
 Posted: 04/08/2016 16:31 Post subject: Drive command machine (RsLogix 5000) |
 |
|
Hello Everyone,
I have a project that i don't know how to start it .
We have a drive (Altivr61) which command Motor with 4 zones (6 machines in every zone) .
They demand from me to automatise the system by forcing the altivar to start with the machine which produces more garbage.
Can anyone help me ? I have to use RSlogix 5000 |
|
| Back to top |
|
 |
zaraza
Junior
Joined: 29 Jul 2016
Posts: 5
|
| Posted: 04/08/2016 17:15 Post subject: Re: Drive command machine (RsLogix 5000) |
|
|
| panicho wrote: | Hello Everyone,
I have a project that i don't know how to start it .
We have a drive (Altivr61) which command Motor with 4 zones (6 machines in every zone) .
They demand from me to automatise the system by forcing the altivar to start with the machine which produces more garbage.
Can anyone help me ? I have to use RSlogix 5000 |
no matter the drives..
If you have to use Logix 5000 there are a lot of choices on this forum as I saw...
What about HMI? |
|
| Back to top |
|
|
panicho
Junior
Joined: 14 Jul 2016
Posts: 13
|
| Posted: 04/08/2016 17:32 Post subject: Re: Drive command machine (RsLogix 5000) |
|
|
| zaraza wrote: |
no matter the drives..
If you have to use Logix 5000 there are a lot of choices on this forum as I saw...
What about HMI? |
I started and I created a list of inputs/ouputs , and I used Grafcet graph for describing the cycles by a succession of steps and transisons, actions. But, my big problem is that i don't know how to automatisate this drive (Altivar61) ? how to force it to choose a specific machine ? i have to use Ethernet/IP for the drive ?
I will use FactoryTalk view for HMI .. |
|
| Back to top |
|
|
dhullett
Member junior
Joined: 01 Apr 2016
Posts: 79
|
| Posted: 05/08/2016 20:53 Post subject: |
|
|
| i replied to this same post on the other forum also. I believe i can help you with configured your drive and the programming but im not sure i understand what exactly your trying to do. Since its ethernet as you said you can use the CIP motion commands that are built into studio 5000 if your using version 21 or above. You would use your logic to select which machine the drive runs first by the commands coming from the HMI or the main sequence if applicable. You could also use a FIFO to store the request for the drive if thats an issue. Before i go any farther could you explain in more detail what exactly your trying to do? |
|
| Back to top |
|
|
panicho
Junior
Joined: 14 Jul 2016
Posts: 13
|
| Posted: 06/08/2016 01:30 Post subject: |
|
|
| dhullett wrote: | | i replied to this same post on the other forum also. I believe i can help you with configured your drive and the programming but im not sure i understand what exactly your trying to do. Since its ethernet as you said you can use the CIP motion commands that are built into studio 5000 if your using version 21 or above. You would use your logic to select which machine the drive runs first by the commands coming from the HMI or the main sequence if applicable. You could also use a FIFO to store the request for the drive if thats an issue. Before i go any farther could you explain in more detail what exactly your trying to do? |
let's explain my project step by step :
1)a drive (Altivar61) control one motor
2) this motor aspirate garbages from all machines
3) the responsible make decision to increment/decrement freqency in Altivar61 by knowing the numbers of machines that work (manually operation every 2/3 hours).
here we will lost a lot of energy, so, my best solution until now is to put a pressure sensor for every machine (and fix it value) and connect these pressures to PLC (Allen-Bradley), so the PLC qill know wich one/ones work and control the Altivar61 (via inputs).
the problem is that I want fabricate a project in RSLogix 5000 but i didn't know how can I add an Altivar61 ? and how to connect it to PLC ? and for supervision, i will use FactoryTalk view (so the responsible can check the process if it work correctly or not from his desk and he can also change ATV61 frequency) , but the altivar61 communicate via ethernet/IP , how to make a relation between factorytalk and ethenet/Ip or it exists before ?! or can i use another type of communication for this drive ?
Thank you for your help Sir |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
