| View previous topic :: View next topic |
| Author |
Message |
James Ross
Junior 2
Joined: 03 Jul 2019
Posts: 28
|
 Posted: 18/05/2021 17:20 Post subject: CompactLogix Problem |
 |
|
Hi
I have just bought a new AB CompactLogix 5380 (5069-L306ER) labeled "FACTORY SEAL".
When I trying to connect via USB or Ethernet on studio 5000 softwares, no matter RSlinks or BOOT-DHCP tool, there is no responding at all.
I know these PLC shipped row and there must be flash before using for first time, But I think when I turned it on via MOD Power, while connected to PC, there must be some sound for connecting via USB cable, or some activity in small led's of Ethernet port in both sides. but there is no response at all.
I'm begining to doubt about my cables, although the USB cable and the Ethernet cable are standard cables, I try it with two or three cables.
P.S: The package does not included a SD card, I put a SD card from my own, Could it be problematic?
Thanks. |
|
| Back to top |
|
 |
James Ross
Junior 2
Joined: 03 Jul 2019
Posts: 28
|
| Posted: 19/05/2021 06:18 Post subject: CompactLogix Problem |
|
|
The Led under the name "OK" lit on red immediate after MOD power on
The display shows "TEST" constantly
Is there any need to turn on via SA power? |
|
| Back to top |
|
|
James Ross
Junior 2
Joined: 03 Jul 2019
Posts: 28
|
| Posted: 20/05/2021 09:59 Post subject: CompactLogix Problem |
|
|
Dear wiaiarei
Thanks for replying so hopefully
I have done stage 2 reset to my Compactlogix, Now the RSlinx can recognize the Compactlogix, but just via from USB cable.
I think before to flash it according to my installed Studio 5000, I need set an IP address to it, and here the problem begins:
I can not connect to it via Ethernet, and even there is no sign of a connected device on my laptop (nothing connected)
How can I fix it?
P.S. I tired to update firmware via USB to V30 in CF software, several times, but failed in all cases. The flashing process goes to last stage and suddenly there is an error about interrupting communication.
James |
|
| Back to top |
|
|
James Ross
Junior 2
Joined: 03 Jul 2019
Posts: 28
|
| Posted: 20/05/2021 10:05 Post subject: CompactLogix Problem |
|
|
And what is NVRAM Bad appearing in front of connected USB in RSlinx software?
You know I put a SD card from my own in the cotroller (SONY SD card 4 Gig) |
|
| Back to top |
|
|
obdyam
Junior
Joined: 04 Jun 2019
Posts: 3
|
| Posted: 20/05/2021 10:35 Post subject: |
|
|
| Maybe you have to use 1784-SD1 or 1784-SD2 Secure Digital (SD) Card otherwise you'll get errors. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
