 |
plc.myforum.ro
PLCs users www.plc.myforum.ro!
|
| View previous topic :: View next topic |
| Author |
Message |
maersk
Member 3
Joined: 17 Aug 2014
Posts: 891
|
 Posted: 19/05/2015 16:54 Post subject: Communication with S7-CPU via BACnet Gateway |
 |
|
Communication with S7-CPU via BACnet Gateway
Gateways enable the communication between two networks that use different communication protocols.BACnet (Building Automation and Control Networks) is a network protocol used in technical building automation.
The task is to create a communication connection between a SIMATIC PLC via PROFINET interface using a BACnet gateway. The objective of this document is to discuss the gateway suitable for this task and how the configuration between SIMATIC PLC and the gateway is realized.
An S7-1200 CPU is used in place of all SIMATIC PLCs. The layout diagram below shows the most important components of the solution for the communication between an S7-1200 CPU and the “UGW//micro PROFINET RS232/485” gateway by MBS GmbH.
https://support.industry.siemens.com/cs/attachments/109476182/109476182_BACnet_DOKU_V10_en.pdf
https://support.industry.siemens.com/cs/attachments/109476182/109476182_BACnet_S7_CODE_V10.zip
https://support.industry.siemens.com/cs/attachments/109476182/109476182_BACnet_UGW_CODE_V10.zip
https://support.industry.siemens.com/cs/document/109476182/communication-with-s7-cpu-via-bacnet-gateway |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
Fa-ti si tu propriul forum GRATUIT, pe www.myforum.ro |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
