plc.myforum.ro

gaty · Member Joined: 01 Mar 2017 Posts: 188

Communication between SIMATIC S7 and Allen-Bradley ControlLogix CPUs via Ethernet: Use of "Echochange" gateways
https://support.industry.siemens.com/cs/document/23901499/communication-between-simatic-s7-and-allen-bradley-controllogix-cpus-via-ethernet%3A-use-of-echochange-gateways

The "Echochange" gateway is equipped with two Ethernet interfaces which can be parameterized differently. Thus, it is possible to link the Ethernet/IP communication on the Allen-Bradley side to the Industrial Ethernet/ISO-on-TCP communication on the SIMATIC side. By means of the "AG_SEND"/"AG_RECV" blocks, a S7-300 CPU then can exchange data with the ControlLogix CPU on the Allen-Bradley side.

The "Echochange" gateway allows easy connection of two existing Ethernet networks with low hardware and configuration effort. In principle, it is also possible to connect other controls and other Ethernet variants as the ones presented here. The usefulness is limited by the restriction to "integer" as the only data type which the concerned controls are allowed to exchange.

Communication SIMATIC S7 and Allen-Bradley Communication SIMATIC S7 and Allen-Bradley

Communication SIMATIC S7 and Allen-Bradley Communication SIMATIC S7 and Allen-Bradley

https://support.industry.siemens.com/cs/attachments/23901499/23901499_Echochange-Gateway_DOKU_V10_e.pdf
https://support.industry.siemens.com/cs/attachments/23901499/23901499_Echochange-Gateway_DOKU_V10_d.pdf

Connection between PROFIBUS Networks and DeviceNet by Anybus X-Gateways
https://support.industry.siemens.com/cs/document/23902276/connection-between-profibus-networks-and-devicenet-by-anybus-x-gateways
This configuration presents the "Anybus X"-gateway sold by HMS GmbH which enables the communication between a PROFIBUS network and a DeviceNet system.

Communication SIMATIC S7 and Allen-Bradley Communication SIMATIC S7 and Allen-Bradley

Anybus gateways consist of two interface modules which operate two different network protocols and one universal "switching module" located in between. All three modules are combined in one single housing. The modular design allows to establish a connection from practically every field bus to any other field bus, either operated as a master or slave, depending on the used module combination. Currently, approx. 170 different gateway variants are available on the market.

One of the variants combines a PROFIBUS Slave interface with a DeviceNet master
https://support.industry.siemens.com/cs/attachments/23902276/23902276_Anybus-Gateway_DOKU_V10_e.pdf

PROFIBUS I/O communication with Rockwell EtherNet/IP
https://support.industry.siemens.com/cs/document/32989175/profibus-i-o-communication-with-rockwell-ethernet-ip
The application consists essentially of three components: The ET200S PROFIBUS I/O interface module, the EtherNet/IP-PROFIBUS gateway (distributed by ProSoft Technology), and the Rockwell ControlLogix PLC. The ET200S PROFIBUS I/O is used on the PROFIBUS side as usual.

Communication SIMATIC S7 and Allen-Bradley Communication SIMATIC S7 and Allen-Bradley

https://support.industry.siemens.com/cs/attachments/32989175/32989175_ProfibusToEthernetIP_v10_en.pdf
https://support.industry.siemens.com/cs/attachments/32989175/32989175_ET200S_EthernetIP_ani.zip

gaty · Member Joined: 01 Mar 2017 Posts: 188

SIMOCODE pro and Allen-Bradley Controller via EtherNet/IP
https://support.industry.siemens.com/cs/document/109748968/connecting-simocode-pro-and-allen-bradley-controller-via-ethernet-ip
This document describes the parameterization and integration of a SIMOCODE pro V EIP into an Allen-Bradley PLC using Studio 5000 and SIMOCODE ES V14 (TIA Portal).

Communication SIMATIC S7 and Allen-Bradley Communication SIMATIC S7 and Allen-Bradley

https://support.industry.siemens.com/cs/attachments/109748968/109748968_SIMOCODE-EthernetIP_DOC_V10_en.pdf