plc.myforum.ro

blackout123 · Junior Joined: 28 Aug 2019 Posts: 1

Do you have the package Codesys Control for Raspberry Pi?

Thanks in advance.

Amarok · Junior Joined: 18 May 2019 Posts: 1

System requirements
CODESYS Development System V3.5.8.0 or higher
The CODESYS Control requires a network interface (LAN, WLAN), especially with the Raspberry Pi Compute Module and the Raspberry Pi ZERO.
If the product is used for industrial purposes, it is the responsibility of the system manufacturer to ensure compliance with the necessary specifications.
The operating system “Raspbian” (from version Stretch)
https://www.raspberrypi.org/downloads/
(https://www.raspberrypi.org/downloads/)
Dynamic libraries needed by the CODESYS Control Runtime binary:
libm.so.6
libpthread.so.0
libdl.so.2
librt.so.1
libc.so.6
libgcc_s.so.1
Restrictions
The combination of Raspberry Pi and a CODESYS Runtime is primarily intended for test and teaching purposes.
The runtime system does not have real-time behavior. Its Jitter depends on many factors, especially on parallel executed Linux applications, and is ideally approximately 50 µs with maximum values of approximately 400 µs.
Required Accessories
SD-card (minimum 4GB)
Optional: CODESYS Runtime Key
[URL=https://www.file-upload.net/download-13703991/CODESYSControlforRaspberryPI3.5.15.0.package.html]CODESYSControlforRaspberryPI3.5.15.0.package[/URL]