plc.myforum.ro

vee · Junior Joined: 23 Apr 2018 Posts: 1

Can IC697BEM733 card use more than 128byte i/o per node.
if I configuration some node in genius bus summary analog input/output plenar more than 128/128 bytes .what happen?and how to fixed it?
:unsure:

hose_almeyda · Junior Joined: 05 May 2018 Posts: 1

The IC697BEM733 can handle up to 128 input/output bytes per remote drop (comprised of a remote I/O scanner and the corresponding modules).
A remote drop can conține a maximum of eight racks, which are linked by a bus transmitter and a bus receiver. Racks with 9 or 5 slots are appropriate. The distance from the first rack to the last in a remote drop is no more than 50 feet or 15 meters.

The IC697BEM733 scanner can accommodate numerous combinations of discrete and analog inputs and outputs regardless of the number of racks in the drop. A remote drop can include all available IC697 discrete modules, analog modules, and analog expander modules. Bus Transmitter, Bus Receiver, PCM, and ADS modules can also be located in a remote drop. It is important to note, however, that a remote drop cannot have any I/O module interrupts, bus controllers, communications modules, or other modules dependent upon COMREQ instructions.

Technical Specifications
Module Type: Remote I/O Scanner
Eff. Data Rate: 38.4 Kbaud
Max Distance from Controller: 7500 feet
Discrete Points Available: 128 bytes per drop
Serial Ports: 2
Current Required: 0.8 Amp