plc.myforum.ro

AnteSavilt · Member 2 Joined: 13 Feb 2018 Posts: 264 Location: Croatia

Backup and Restore of the SINAMICS S210 device settings with SIMATIC
https://support.industry.siemens.com/cs/document/109769958/
The function block SINA_BACKUP_RESTORE is used to save drive settings remanently in the controller’s memory. The drive settings therefore are stored in a global DB of the controller. By the function block the stored settings can be transferred to a drive device. For the transfer there are two modes available:
Transfer the parameter settings including communication data (e.g. for spare part replacement)
Transfer the parameter settings without communication data (e.g. for serial commissioning)

The function block SINA_SERVICE includes the control of the following drive functions of the SINAMICS S210:
Copy Ram to Rom (save parameter settings remanently at the drive device)
Acknowledge faults
Reset the drive device to factory settings
Preconditions for Version 3.0
TIA Portal V16 or more recent
SINAMICS S210 (from Firmware V5.2)
SIMATIC S7-1500 or S7-1500T
SIMATIC S7-1500 or
SIMATIC ET200 CPU / ET200SP or
SIMATIC ET200 CPU / ET200pro / CPU 1516pro-2 or
SIMATIC Controller Application / SIAMTIC S7-1500 Software Controller (außer CPU 1505S) or
SIMATIC S7 Open Controller / ET200SP Open Controller or
integrated SIMATIC S7-1500 at SINUMERIK ONE / SINUMERIK MC
Download
https://ulozto.net/tamhle/1NELvj4CWc0D/

https://anonfiles.com/Pe4cv797p7/109769958_SINA_backup_restore_SINA_service_en_pdf
https://anonfiles.com/Rf4dva9cpb/109769958_SINA_backup_restore_SINA_service_en_V3_0_pdf
https://anonfiles.com/Zd42v891pb/109769958_LSINASup_V200_zip
https://anonfiles.com/b955vb9dpe/LSINASup_V300_zip