plc.myforum.ro

Gellager · Junior Joined: 30 Oct 2018 Posts: 3

Good day!
Please tell me the options for calibrating the touchscreen of the B & R Power Panel 100 4PP120.1043-31 Rev.K0 without BIOS.
After the damage, the touch screen managed to calibrate.
After replacing the touchscreen with a new serviceable one, it is impossible to "push" the buttons - you need to start above the button, off-screen.
There is no project source.
A faulty touchscreen also fails to do a calibration.

Can I reset the default calibration settings?
Where is the calibration table stored?
Is there a way to immediately call calibration after power on?

I would be very grateful for any ideas!

bark · Junior Joined: 02 Aug 2017 Posts: 18

if Windows CE
Windows CE starts the touch screen calibration sequence during its first boot in the default
configuration / delivered state.

if Windows XP embedded (First Boot Agent)After first starting , the touch screen driver must be
installed in the device in order to operate the touch screen. The corresponding drivers can be
downloaded from the download area on the B&R homepage (www.br-automation.com). The
touch screen should be calibrated while installing the driver.
this is manual
https://assets.euautomation.com/uploads/parts/pdf/4pp220057165.pdf
try to update to ko1
https://www.br-automation.com/en/downloads/

https://www.br-automation.com/en/downloads/?tx_brcdn_downloadlist%5Bid%5D=DWL%40DWL10000077785%4000&tx_brcdn_downloadlist%5Blang%5D=%2A&tx_brcdn_downloadlist%5Baction%5D=download&tx_brcdn_downloadlist%5Bcontroller%5D=Download&cHash=9de7b1d6551729b6ca3d1952bab7f074

Gellager · Junior Joined: 30 Oct 2018 Posts: 3

Thank you very much for your answer!

Panel unfortunately without BIOS and Vindovs, it is on Automation Rintite.
It looks like speaker version 2.68.
Photo of the screen panel when loading attach.
[url]https://mega.nz/#!LHBQAKjJ!548XuEfLzpM7F-h9XUX0sDUKEidPglhgEDFf8V2Wdbg[/url]

Update fear that the project would not stop working.
Source project is not: (
The contents of the memory card:
[url]https://mega.nz/#!bHIHiQoC!A72heWAsTkBt6rLpJ91FDrvZngT0P7u6o2M0E0dMai0[/url]

Can I have the option to reset the default touchscreen settings via RS232?
Can you tell me where the calibration table is stored? As I understand it inside the panel, not on the memory card.

How do you think creating a project with one large “Calibrate” button can solve a problem?

I tried to emulate pressing the touch, but I could not “push” the calibration start button. :(
I attach the video.
[url]https://mega.nz/#!iLQTnArZ!QeUTEC7PNSYs3UG0j96k72ljg3wIfn1gTBRml_h9_BU[/url]

tayfunyd · Junior Joined: 20 Jan 2019 Posts: 1

You can operate a B&R Power Panel 100 BIOS or B&R Mobile Panel 100 BIOS device with the Remote Host (REMHOST) Utility via a serial interface from a PC.

https://www.br-automation.com/sv/downloads/industrial-pcs-and-panels/power-panel-100200/bios-remhost-utility/

Gellager · Junior Joined: 30 Oct 2018 Posts: 3

Yes, but in this panel there is no BIOS, there is no Windows, this panel with Automation Runtime. :(
When loading this screen:
[url]https://mega.nz/#!LHBQAKjJ!548XuEfLzpM7F-h9XUX0sDUKEidPglhgEDFf8V2Wdbg[/url]

mohdabshr · Member junior Joined: 07 Oct 2012 Posts: 86

Hi if your screen have cf card it is possible to do this:

make image from your cf card by runtime utlity manger by fÄƒcute adisk image and restore this image to another cf and with new cf card when you put it in the screen and power up it it will direct going to touch calibration and this only one times.

akbar_torkashwand · Member Joined: 09 Nov 2018 Posts: 228

I have same problem. Did you solve your problem?
and also where can I download runtime utility manger software?

Power Panel Parts · Junior Joined: 24 Apr 2019 Posts: 1

We suggest to check the replacement touchscreen as competitable as the old one, if the 4wire around of the touchscreen are different, no matter how calibrate, the HMI would working in a wrong position or even in a cornor.

Vicpas provide 1:1 B＆R Power Panel 100 4PP120.1043-31 touchscreen glass for replacement, 100% compatitable, and even on need to calibrate.

https://www.vicpas.com/oid1736764/For-B-R-Power-Panel-HMI-touch-screen-glass-Graphic-operator-panel-keypad-repair.htm
_________________
VICPAS supply all kind of touch screen panel, protective film, and lcd display for Industrial automation HMI panel replacement. Here you can find high-quality products in a competitive price to repair your devices.
www.vicpas.com
www.cmtouhcpanel.com