plc.myforum.ro

grig100 · Member 3 Joined: 01 Jan 2015 Posts: 752

How do you assign the associated PROFIsafe addresses to the F modules of the ET 200SP without additional Engineering?
https://support.industry.siemens.com/cs/document/109748466/

Using the FB "PROFIsafeAddrAssign" provided here you can assign the PROFIsafe address for modules of the ET 200SP without additional Engineering. Using this block the memory card of the configuring and programming tool is written so that it is then also available for other controllers of a machine series.

Assign PROFIsafe addresses to the F modules ET 200SP Assign PROFIsafe addresses to the F modules ET 200SP

Assign PROFIsafe addresses to the F modules ET 200SP Assign PROFIsafe addresses to the F modules ET 200SP

Apart from manual control of the FB "PROFIsafeAddrAssign" for assigning the PROFIsafe addresses, there is also an option for automatic address assignment. For this we provide the projects listed below (TIA Portal V14 und STEP 7 V5.5) that also conține the possibility of configuration control.
The FB "PROFIsafeAddrAssign" is already in each of the projects. In addition, however, we also provide this separately in a block library.

https://support.industry.siemens.com/cs/attachments/109748466/109748466_F_Taufe_en.pdf

Automatic Address Assignment for S7-300 (With and Without Configuration Control)
https://support.industry.siemens.com/cs/attachments/109748466/Auto_Addressing_S7-300.zip
Automatic Address Assignment for S7-1500 (With and Without Configuration Control)
https://support.industry.siemens.com/cs/attachments/109748466/Auto_Addressing_S7-1500.zip
Block Library of the FB "PROFIsafeAddrAssign" for TIA Portal and STEP 7 V5.5
https://support.industry.siemens.com/cs/attachments/109748466/PROFIsafeAddrAssignV2.0.1.zip