| View previous topic :: View next topic |
| Author |
Message |
gstephens
Junior 2
Joined: 08 Aug 2013
Posts: 23
|
 Posted: 13/05/2014 13:45 Post subject: 2711-T9C9 & PanelBuilder32 |
 |
|
Has anyone ever programmed the 2711-T9C9 using PanelBuilder32? I can not communicate with the Panelview. I'm using ver 3.80 and a 2711-NC13 cable. but, it never connects. Have tried several Motherboards.
Any suggestions would be appreciated!! |
|
| Back to top |
|
 |
luke
Junior 2
Joined: 11 May 2014
Posts: 27
|
| Posted: 13/05/2014 22:20 Post subject: Re: 2711-T9C9 & PanelBuilder32 |
|
|
| gstephens wrote: | Has anyone ever programmed the 2711-T9C9 using PanelBuilder32? I can not communicate with the Panelview. I'm using ver 3.80 and a 2711-NC13 cable. but, it never connects. Have tried several Motherboards.
Any suggestions would be appreciated!! |
As I know it is a DH485 using RS232 media (9 pin) with a RS232 printer port.
To access the DH485 port you will need a computer with a real serial port running on XP SP2 or SP3 and use
1. the AIC driver in RSLinx and a straight through cable
2. or a 1747-UIC using the RS232 port and a straight through cable.
Do you have this OS and cable? |
|
| Back to top |
|
|
gstephens
Junior 2
Joined: 08 Aug 2013
Posts: 23
|
| Posted: 14/05/2014 13:53 Post subject: Re: 2711-T9C9 & PanelBuilder32 |
|
|
thankx, Luke
I'll try the PIC - AIC. I'm running XP SP3.
I didn't want to do this but, since the PanelView Manual connection didn't work, I'll have to use the "backdoor".
Thankx, again!!
Glenn |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
